![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Vengance_01
Supreme [H]ardness
- Joined
- Dec 23, 2001
- Messages
- 7,731
My hardware is as follows:
HP ProLiant Micro server
Athlon II Neo 1.3GHZ (Dual Core)
4GB DDR3 Ram
4x 1TB Samsung F3 drives
On-board Broadcom 1GB PCI-E Nic
Software I am using an un-tweaked Nexenta CE 3.0.5 install. I am accessing through CIFS which on read, give me a steady 100MB/S solid. When writting, I am getting only 70-80MB/s but the network graph is all over the place bouncing between 10-99%
The workstation that I am accessing the NAS from is a new Sandybridge build with a dedicated Intel GT 1000 PCI-Express nic and a 1GBit Trednet switch(the one that was on sale at amazon a few months back.) Jumbo Frames are not enabled at this moment. Any tips to get the write speeds stable like the read speeds?
HP ProLiant Micro server
Athlon II Neo 1.3GHZ (Dual Core)
4GB DDR3 Ram
4x 1TB Samsung F3 drives
On-board Broadcom 1GB PCI-E Nic
Software I am using an un-tweaked Nexenta CE 3.0.5 install. I am accessing through CIFS which on read, give me a steady 100MB/S solid. When writting, I am getting only 70-80MB/s but the network graph is all over the place bouncing between 10-99%
The workstation that I am accessing the NAS from is a new Sandybridge build with a dedicated Intel GT 1000 PCI-Express nic and a 1GBit Trednet switch(the one that was on sale at amazon a few months back.) Jumbo Frames are not enabled at this moment. Any tips to get the write speeds stable like the read speeds?