• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

ZFS disk errors

J

JWeavis

[H]ard|Gawd
2FA
Joined
Aug 11, 2000
Messages
1,723
napp-it OI OpenIndiana appliance v. 0.500s nightly Jul.03.2011

Code: 
Disks in use:
id	cap	pool	vdev	identify	state	if	busy	error	vendor	product	sn	 
c1t10d0	2.00 TB	jweavis	raidz	via dd	ONLINE	c1	configured	Error: S:0 H:0 T:0	ATA	SAMSUNG HD204UI	-	 
c1t1d0	2.00 TB	jweavis	raidz	via dd	ONLINE	c1	configured	Error: S:0 H:0 T:0	ATA	SAMSUNG HD204UI	-	 
c1t2d0	2.00 TB	jweavis	raidz	via dd	ONLINE	c1	configured	Error: S:0 H:0 T:0	ATA	SAMSUNG HD204UI	-	 
c1t4d0	2.00 TB	jweavis	raidz	via dd	ONLINE	c1	configured	Error: S:0 H:36 T:0	ATA	ST32000542AS	-	 
c1t8d0	64.02 GB	jweavis	cache	via dd	ONLINE	c1	configured	Error: S:0 H:0 T:0	ATA	OCZ VERTEX-TURBO	-	 
c2d0	37.02 GB	rpool	basic	via dd	ONLINE	-	-	Error: S:0 H:0 T:0	-	-	WD-WMAKH1165430	 
c2d1	2.00 TB	jweavis	raidz	via dd	ONLINE	-	-	Error: S:0 H:0 T:0	-	-	 	WD-WCAZA01


Disks not in use:
id	cap	pool	vdev	identify	state	if	busy	error	vendor	product	sn
c1t3d0	2.00 TB	-	-	-	-	c1	configured	Error: S:0 H:36 T:0	ATA	ST32000542AS	-
c3t0d0	0.00 GB	-	-	-	-	-	-	Error: S:0 H:0 T:0	ATAPI	DVD A DH20A4P	-
Code: 
 pool: jweavis
 state: ONLINE
 scan: scrub repaired 0 in 9h7m with 0 errors on Mon Jul 18 08:07:15 2011
config:

	NAME         STATE     READ WRITE CKSUM
	jweavis      ONLINE       0     0     0
	  raidz1-0   ONLINE       0     0     0
	    c1t1d0   ONLINE       0     0     0
	    c1t2d0   ONLINE       0     0     0
	    c1t10d0  ONLINE       0     0     0
	    c1t4d0   ONLINE       0     0     0
	    c2d1     ONLINE       0     0     0
	cache
	  c1t8d0     ONLINE       0     0     0

errors: No known data errors
About 2 weeks ago, c1t3d0 showed up as degraded, so it was replaced. I haven't removed it or found out how to "remove" it from the pool. Yesterday both the Seagate drives were at H:24
 
Is your question how to remove the old disk, if so zpool remove poolname /deviceid is the command to do so. In your case zpool remove jweavis /c1t3d0 should do the trick.
 
That was one of them, thank you, but:
Code: 
cannot remove /c1t3d0: no such device in pool

The other was, why do I seem to have the Hard errors increasing on both the Seagate drives in the same increments?
 
You must log in or register to reply here.
Back
Top