YY Cube Mod

[Sc0rian]

This is the Gear
http://forums.bit-tech.net/showthread.php?t=80560http://forums.bit-tech.net/showthread.php?t=80560

2 X Tank-o-Matic's
1 X kit Kat
2 X Green dye's
1 X power fluid
1 X 1250 pump
1 X nv68
1 X Sliver TDX <<
1 X Pci relay card
1 X Artic Silver
1 X T shirt
1 X Tygon Pipe


I would like to thank paul again. lol, also someone called "sparks".

Also like to thank acrim, you will find out later.

I am modding my YY cube...

This is going to be the WC setup..

If you can make sence of that is the led setup..

I am having two led's each side of res (2 of each res) they are going to be uv,
but i am having 3 in the middle that are different LED colours. But these led's will be controled in software, I am going to put it into a printer port, to allow me to turn the led's on and off, the uv led's on and off, and to be able to do effects. Also I will be able to access the led's online, So i can turn them on and off anywhere .

Starting to get the case ready.

First hole Cut

 

[Sc0rian]

YAY 2nd hole cut.

Right time to cut the res holes

Done that, the small holes are for the led's... 3mm.

Time to put fan stuff around hole..

spent well, a good week getting the screws in this rad. And finally done it, it doesnt look much, but trust me it was a 100% pest. When pauls it, he is gonna have to buy my a pint for it.

LOOK AT THAT. Lovely sexyness looks so so so NICE!.

Holes big enough for tube to go through...

Bigger hole for tube to go though .

Today I cut the hole little bigger for res (again). So it's all ready now to be screwed in, with the leds etc.

Anyway I cut holes for pump today. Very tight on one of the screws and the wheel.

BLeh as you can see, I put vibration mount in, there is about 0.02mm of a gap for the nut :X!

Next thing, is I cut the front of the case pannel today. It had a big plastic block that would really suck for the air flow. As the fans are sucking the air will be sucked in from the bottom, goes up though the 2 X fans and out. So I have to cut this plastic bit out for air flow:

- Update for today.

And yes I will tidy up the hole. It doesnt "really" matter as it wont be viewable at all

 

[Sc0rian]

I got the pump installed. And tbh I don't think I could get it any better than I did. Was pretty bang on.

ERK!!!! Sexy fit!

Thats all for now. Enough Spam!

- S

 

[CrimandEvil]

Mmm.. cube goodness.

 

[Kankykur7]

dang i always wanted to do this to my cube.... i even had all the parts ready until my parents told me " no water and electronics together in this household"....

anyways great job so far, i cant wait to see the rest of it!

 

[starhawk]

that looks very nice so far... i'm going to watch this one.

and Kank... all you had to do to dodge that one is to show them that you could do it and not have it leak... that's what I call persuasion.

 

[Hate_Bot]

dang i always wanted to do this to my cube.... i even had all the parts ready until my parents told me " no water and electronics together in this household"....

anyways great job so far, i cant wait to see the rest of it!

Hehe, 2 seconds after showing my dad someone elses water-cooled rig he sais "Were doing that for our computer".

My dads a nut for new and cool things. Especially when they involve electronics....

 

[Sc0rian]

erk:|.

Your dad's cool !


Well, the led circuit is in the middle of being done. Should get some pics on monday. The VB program is half wrote. Yay

- S

 

[Sc0rian]

A big update today:


Getting it all ready for w/cing

Erk, yes i am mad... Tell me please!

Right its installed!

Ok the pipe work is ready.

w00t water

Here are some uv pics:

Thats all for now!


- S

 

[Atragon]

Very cool

 

[Hate_Bot]

Hey... Putting tube resevoirs on top of the case...

Idea Stolen!

 

[Sc0rian]

Thanks

I got a few more pics.

I will have the led mod soon.

I just going to put the case all together.

- S

 

[CrimandEvil]

I love how that looks.

 

[Kankykur7]

^^^^^^^

 

[Garage81]

yeah, thats money.

nice!