![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
- Joined
- Jul 17, 2006
- Messages
- 14,416
Just designed a 3D printed enclosure today for the XT2AT keyboard converter.. if anyone needs it for their retro rigs, here's the links:
Enclosure: https://www.thingiverse.com/thing:4032766
PCB: https://oshpark.com/shared_projects/ZFNCQZRX
BOM:
2x CP-2350-ND (5-pin DIN Female PCB Mount)
1x CP-2260-ND (PS/2 6-pin DIN Female PCB Mount)
1x PIC12F629-I/P-ND (PIC processor for keycode translation)
1x A24807-ND (8-pin DIP Socket)
1x 568-1360-1-ND (Diode, 100V/200mA DO-35)
3x P4.7KBACT-ND (4.7k ohm 1/4w 5% Resistor)
1x P10375TB-ND (47uF 25V Electrolytic Capacitor)
1x A30916-ND (2-pin Jumper Header)
Source code and HEX for flashing the PIC attached.
Enclosure: https://www.thingiverse.com/thing:4032766
PCB: https://oshpark.com/shared_projects/ZFNCQZRX
BOM:
2x CP-2350-ND (5-pin DIN Female PCB Mount)
1x CP-2260-ND (PS/2 6-pin DIN Female PCB Mount)
1x PIC12F629-I/P-ND (PIC processor for keycode translation)
1x A24807-ND (8-pin DIP Socket)
1x 568-1360-1-ND (Diode, 100V/200mA DO-35)
3x P4.7KBACT-ND (4.7k ohm 1/4w 5% Resistor)
1x P10375TB-ND (47uF 25V Electrolytic Capacitor)
1x A30916-ND (2-pin Jumper Header)
Source code and HEX for flashing the PIC attached.