XFX 4850 and PowerPlay

Dunno, XFX might have modded their bios for no 2d clocks.
There are really no definitive reviews of the XFX on the 'net yet... Personally I am about to buy two of them, and do a review, but not for another few weeks.

If you have the time, would you mind taking some pictures of it? :D
 
i guess some vendors do not have 2D/3D clocks setup in their card bios. try look for the latest XFX card bios and see if they made changes to the powerplay setting.
 
Your BIOS indicates that the card runs at 625/993@1.258v all the time; 2D/UVD/3D.

Pretty piss poor, considering the extra price you pay for an Xfx card. You'd expect they could figure out how to properly set the card to underclock GPU/MEM speeds and undervolt in 2D for power savings and heat reduction.

Not that big of a deal though, as you can change it yourself. Just edit both clock info #s 01 and 02 to 500/750@1.129v. You can probably go lower than that for the GPU/MEM clocks...
 
I can confirm that the 2D clocks do not change in the CCC on my new XFX 4850. I am extremely disapointed with XFX. Does anyone know how to go about fxing this?
 
I can confirm that the 2D clocks do not change in the CCC on my new XFX 4850. I am extremely disapointed with XFX. Does anyone know how to go about fxing this?
Change the settings and flash the bios, or use a program like ATI Tray Tools (Maybe Rivatuner also?) and setup custom clock/volt settings for 2D mode and 3D mode.
 
Change the settings and flash the bios, or use a program like ATI Tray Tools (Maybe Rivatuner also?) and setup custom clock/volt settings for 2D mode and 3D mode.

Could you give me an example? I don't want to chance ruining my card.
 
If your using Vista, get the latest version of ATT(Ati Tray Tool), version 1.6.9.1374 beta and right click and install as admin. Then go to hardware/overclock settings and keep bumping the memory speed down till you have issues. My 4850 will only go down to 600mhz on the mem, after that i get corruption/artifacts just sitting at the desktop. Lowering the memory speed is where most of the power savings come in. Then lower the core clocks down and test to make sure you get no artifacts. This will just reduce idle temps but hardley any power reduction can be seen.

Just a note, the screen will flash once when you click apply anytime you change the mem speed.

So on mine, I ended up with 360/600 at .892v for idle, which saved me 15w over the stock 2d settings of 500/1050.

As I said lowering the core clocks or voltage made virtually zero difference in idle power consumption. The only reason I did lower the clocks and voltage was that it did make a difference in light load situations. So for movie playback or playing Vista Games the lower clocks/voltage do fine while drawing less power.
 
For XFX 4850 owners.
Here is a bit moded bios, Tmin moved from 20 to 45, added 2D clocks with lower temp., and clock from 625/993 to 650//1050 since xfx maded biger voltages then normal 4850's.
Making fan speed more quiet in idle, almost inaudible, temp is lower due to 2D mode with lower voltages.

here is moded bios:
http://rapidshare.com/files/202563693/xfx48502d3dfanfixed.rar

winflash:
http://rapidshare.com/files/202564735/winflash.rar

here is original xfx 4850 bios:
http://rapidshare.com/files/202564421/XFX4850.rar
 
For XFX 4850 owners.
Here is a bit moded bios, Tmin moved from 20 to 45, added 2D clocks with lower temp., and clock from 625/993 to 650//1050 since xfx maded biger voltages then normal 4850's.
Making fan speed more quiet in idle, almost inaudible, temp is lower due to 2D mode with lower voltages.

here is moded bios:
http://rapidshare.com/files/202563693/xfx48502d3dfanfixed.rar

winflash:
http://rapidshare.com/files/202564735/winflash.rar

here is original xfx 4850 bios:
http://rapidshare.com/files/202564421/XFX4850.rar


Thanks for posting that. I'd like to try it out but I'm having problems with winflash. Any ideas?
 
Back
Top