x800 GTO Issue, any solution?

[flagpolekilla]

Hey all, how goes it?

I need some further assistance with a current VIDEO CARD flash im currently doing.
I want to flash my X800GTO AGP(sapphire) to a X800XT but when i type:

A:\> Flashrom -f -p 0 empty.bin I get:

Serial ROM
BIOS DeviceID = 0x4A4B
ASICDevice ID = 0x554F
Existing SSID = 0x1600
New SSID = 0x4052
Existing BIOS P/N = 11x-cc6600sa-004
New BIOS P/N = 113-aa16106-103
Flash type = ST m25p05/c
Error: data not erased

*flashing* ERROR 0FL01 : press "1" to continue

Well I typed in A:\>Flashrom -l and A:\>Flashrom -i to check if it was locked and they both tell me that my SERIAL ROM IS LOCKED

Now, is there anything out there that I can do to solve this situation? I have used ATITOOL and everything matches up, and I know i can flash it from 12-16 pipeline and all that good stuff. But I keep getting stuck at this LOCKED part.

I even tried A:\>flashrom -f -p 0 x800xt.bin *new bios* and i still get the error. So, If ANYONE out there can tell me anything about my situation or how I can unlock my serial ROM, please post up.

~By the way, im using the guides off of the techpowerup.com website.~

Thank you all for your time and energy

 

[CrAzYsPyDeR]

use ATIWinflash , an select force to write to the bios.