• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

X79 / C600 RAID Help!

V

Vega

Supreme [H]ardness
Joined
Oct 12, 2004
Messages
7,392
Sigh, the C600 RAID on the Rampage IV Extreme has been a major PITA to get working properly. Now it is stuck at SATA II speeds:

R4ESATA2.jpg


Running BIOS 2012, two 120 GB Vertex 3 Max IOPS connected with 6 GB/S cables (same drives and cables I just removed from Z68 board that was running over 1000MB/Sec Sequential Read so I know it is not the drives or cables), SSD just secure erased, plugged into 6 GB ports on MB, secondary/aftermarket SATA chip disabled, created 128k stripe in Raid 0, BIOS settings set to Raid, hot-plug disabled and SMART enabled, running Intel C600 RAID driver: 3.0.0.3011, everything under Intel RST interface is showing good, SSD Write caching enabled.

As far as I can tell everything is set up perfect and I should be getting SATA 3 speeds, not 2. So is there some super secret SATA 3 BIOS entry or something simple I am missing?
 
You must log in or register to reply here.
Back
Top