X58 PCI-E Question

WorldExclusive

[H]F Junkie
2FA
Joined
Apr 26, 2009
Messages
11,557
The motherboard I'm looking at has three 16x PCI-E slots running at 16x/16x/4x.
Now that means the last slot will run at 4x when the first and second slots are running at 16x.
If I install a video card in slots 1 & 3 but not in the 2nd slot, will they run at 16x?

If not, at what speeds will they run?
 
Is the 3rd capable of supporting 16 lanes? Which motherboard?
 
When a PCIe slot configuration is presented as "16x/16x/4x" and you're talking about a X38, X48 or X58-based motherboard, you can be certain that:

1) All the slots are fixed-speed;
2) The PCIe 16x slots are PCIe 2.0-based, coming from the Northbridge, and the PCIe 4x slot is PCIe 1.1-based, coming from the Southbridge.

Which means that the third slot will ALWAYS run at a maximum of 4x (you can still install PCIe 1x devices there), no matter which (if any) of the PCIe 16x slots are populated.

Cheers.

Miguel
 
OK so I can only run 16x in slots 1 & 2.

Are there any boards I can run 16x in slots 1 & 3? I need space in-between the cards.
 
When a PCIe slot configuration is presented as "16x/16x/4x" and you're talking about a X38, X48 or X58-based motherboard, you can be certain that:

1) All the slots are fixed-speed;
2) The PCIe 16x slots are PCIe 2.0-based, coming from the Northbridge, and the PCIe 4x slot is PCIe 1.1-based, coming from the Southbridge.

Which means that the third slot will ALWAYS run at a maximum of 4x (you can still install PCIe 1x devices there), no matter which (if any) of the PCIe 16x slots are populated.

Cheers.

Miguel

x58 is capable of 36 pci-e 2.0 lanes. so the last 4 'could' be 2.0.
 
I also have the Pro-E. I can confirm that only the top two slots are 16x, and the third is 4x. GPU-Z will tell you what speed/spec the slot is running at.

I don't know if I've seen a mobo with 16x slots that are spaced further apart, especially top and bottom. But I have seen a few that have a 16x and an 8x at the top and bottom, respectively. In fact, I am looking to get a board like that to replace my Pro-E. The temps on my top 5770 HAWK are a good 5-15C warmer under load than those of the bottom card. If I find any boards with 16x slots top and bottom I'll be sure to post here again.

EDIT: Yeah, it sounds like that board you linked would do 16x in top and bottom. I haven't been looking at boards in that price range, though. :S
 
Out of curiosity, why do you want a board that can run slots 1 and 3 at 16x? If you just want some more space between slots, perhaps you should take a look at something like the ASUS P6T Deluxe, which has two slots between the first and second PCI-E 16x slots.
 
I know about that board, I was hoping for something with a blue and black theme.
If I can't find anything I will go with the P6TD.
 
How about ASRock's X58 line of motherboards, like the SuperComputer or the Deluxe3? Not exactly only "blue and black", but the blue slots can handle full 16x connectivity and are located 3 slots apart from each other. Plus you can have up to 4 PCIe cards operating at PCIe 2.0@8x each.

@Kritter: Good point, though I don't think any manufacturer has gone that route. Thanks for the heads-up!

Cheers.

Miguel
 
The ASRocks are similar to the ASUS P6T6 Rev and P6T7 Super which are black and blue.
With the NF200 chip, can I run 16x in slots 1 and 3?
 
OK great. I'm going to wait and see if the Rampage 3 has NF200 also, if not I'll go with the P6T6.
Thanks for your help.
 
The only thing I don't like about ASRock boards is that they supposedly don't OC as well as others. This was according to a big review I read (don't remember where). It could be an isolated incident, but I'd rather spend a little more to be safe.
 
Back
Top