X1900XTX Corruption PSU Related?

afx

n00b
Joined
Aug 1, 2004
Messages
55
Hey guys,

Specs:
C2D E6400
ATI X1900XTX
Asus P5W DH Deluxe
2GB PC2-6400 OCZ Gold XTC
430W Antec PSU
3 SATA2 HDD
1 IDE DVD+-RW

I bought a system a year ago, and I've had a problem related to games. I finally had time to really investigate the problem, so I took the card out and found out a wall of dust where the card gets it's air, so I removed it, tried playing a game and it worked! But 30 minutes later, the corruption was back (polygons getting stretched out and going to the same spot in the screen).

I've never actually looked into it, but can my PSU be the cause of my problem? If so, which one should I buy?

Thanks.
 
Hi afx...Im starting to have the same issue that you are. The polygon stretching and such. ..At first I thought maybe my GPU was getting too hot, but it never hits over 61 degrees...So im looking for the same answer that you are..
 
There is no fix, the cards are just trashed apparently. Some report that a VF900 can help, so you could perhaps try that. Previously I would have told you to use the search as I've seen atleast 10 of these same threads, but this time I'll refrain.
 
I have the exact same problem.
The issue started when the thermistor, or what I think was the thermistor....or whatever took the temperature from the card and controlled the fan speed, went bad and my card overheated...for like a week or two. I used ATi tool to manually control the fan speed, but now, and probably forever, there is a corrupted texture that goes from the center of the screen out to some random point in the game. Not terribly distracting, and it doesn't happen all the time (or maybe it's soo narrow I don't see it) but I just attribute it to a hardware failure.
 
So I guess there's nothing to do, except try a VF900 or just upgrade it...

I used to buy ATI cards because the image quality was better than nVidia but I think I don't have a choice and the next cards will be nVidia...
 
Ok, I may have found a solution.

My powersupply is a 430w but the 12v line is only 16A, and ATI recommends 30A.
Here are the specs:
Code:
AC Input  	    	    	    	    	    	  
100 - 240V/7Amps; 50Hz - 60 Hz 	 
DC Output 	+ 5V 	+ 12V 	+ 12V 	+ 3.3V 	- 12V 	- 3.3V
Max 	        25A 	  16A 	  16A 	 25A   0.8A 	 2A
Min 	         0.3A     1A 	1A 	  0.5A     0A 	     0A
+ 3.3,  + 5V max. load:130 Watts; +12 V max. load: 372 Watts

So can anyone recommend me a really good powersupply which would work flawlessly with a SLI 8800 GTS?

Edit: Is this a good one? http://www.ncix.com/products/index.php?sku=19831&vpn=CMPSU-620HX&manufacture=CORSAIR&promoid=1060
 
Back
Top