WTB: Laser printer with RS-232 serial port

Status
Not open for further replies.

savoirfaire

Limp Gawd
2FA
Joined
Aug 7, 2005
Messages
243
Hi, guys - There is a 74-year-old lady at one of the places where I work who uses a really old piece of scientific equipment. It prints via IR to this 90's-era inkjet printer which takes forever to print, and then half the time the damn thing doesn't link up. The only hard-wired option is an RS-232 serial connection, but not many printers have that option anymore. Does anyone in the Boston to Rhode Island area have an old laser printer with an RS-232 port they are interested in selling at a reasonable cost? I've been watching craigslist for a small unit like a Samsung ML1710, but nothing has come up for a while.
 
Old HP 4000 series printers should have Serial inputs and they are fucking workhorses. Seen many with over a million prints on them.
 
You could also always use a serial to parallel converter box.

You will have to make sure that the equipment you are printing from is compatible with what the printer accepts as input though.

Probably some HP emulation mode is what it uses.

http://www.ebay.com/itm/VINTAGE-SERIAL-TO-PARALLEL-CONVERTER-/321690789427?pt=LH_DefaultDomain_0&hash=item4ae643e633

http://www.ebay.com/itm/EAZY-BLACK-BOX-SERIAL-TO-PARALLEL-CONVERTER-III-PI115A-/360603004648?pt=LH_DefaultDomain_0&hash=item53f59d2ee8

http://www.ebay.com/itm/TECHNOLOGIC-BF-40-512K-PARALLEL-TO-SERIAL-BUFFER-/181089525160?pt=LH_DefaultDomain_0&hash=item2a29c6dda8

Regardless of what you use, output to a printer from a serial port is going to be really slow.
 
As an eBay Associate, HardForum may earn from qualifying purchases.
You could also always use a serial to parallel converter box.

You will have to make sure that the equipment you are printing from is compatible with what the printer accepts as input though.

Probably some HP emulation mode is what it uses.

http://www.ebay.com/itm/VINTAGE-SERIAL-TO-PARALLEL-CONVERTER-/321690789427?pt=LH_DefaultDomain_0&hash=item4ae643e633

http://www.ebay.com/itm/EAZY-BLACK-BOX-SERIAL-TO-PARALLEL-CONVERTER-III-PI115A-/360603004648?pt=LH_DefaultDomain_0&hash=item53f59d2ee8

http://www.ebay.com/itm/TECHNOLOGIC-BF-40-512K-PARALLEL-TO-SERIAL-BUFFER-/181089525160?pt=LH_DefaultDomain_0&hash=item2a29c6dda8

Regardless of what you use, output to a printer from a serial port is going to be really slow.

Yeah I looked into those for her but they cost enough that it seems more economical to get an older laser printer. She is just printing ECG tracings one page at a time so it should still be an improvement over the current printer which does I think 3 ppm.
 
As an eBay Associate, HardForum may earn from qualifying purchases.
The HP LaserJet 5 series also has a serial port (I just checked). They are faster and have a much shorter warmup time than the 4 series.
 
Thanks, looks like there are a couple local ones in the $50-75 range that I will check out
 
Last edited:
Status
Not open for further replies.
Back
Top