Wrong temps on IS7 RV2?

p0stal

Limp Gawd
Joined
Aug 27, 2004
Messages
381
Sorry if this is in the wrong place, but....

Ok...So I just got done building my friends mom a new computer ( http://hardforum.com/showthread.php?t=865500 ) and I set it all up and configured that bios and did all that stuff. I went into the section of the bios where it lists the CPU throttling and shutdown options when I noticed that the CPU was idling at 80c.....Now I know it's a Prescott, but still......80c?!?!? The warning beep kept sounding off everytime I tried to install windows, and eventually it would jus reboot before it got to the formatting screens. I'm really hoping that the motherboard is reporting the temps wrong, because I don't want the processor to die.
Motherboard: http://www.newegg.com/app/ViewProductDesc.asp?description=13-127-175&depa=0
CPU: http://www.newegg.com/app/ViewProductDesc.asp?description=19-116-178&depa=0


No overclocking either. I would try reseating the HSF, but I have no AS5 handy or any other kind of thermal compound. Is there any kind of BIOS revisions that fix this temp mis-reading (which im hoping it is)? Should I try to reseat the HSF, even though I don't have any thermal compound?

Any suggestions are welcome...I need to get this figured out before I turn my friends mom loose on this computer.

+edit+ btw, I tried the search button first, so sorry if this has already been discussed/solved somewhere else.
 
I have an original IS7 and I do know that a bios upgrade fixed a temperature issue for me. I'm taking it your using the stock HS? Recommend you install it on the MB outside the case. Sometimes when you attach the HS it really doesn't attach right and you can't tell from doing it in the case.

If you took your time and did it slow outside the case, it should be ok. Watch it from a good side view as you make sure all four "arms" are clicked in right.

Regardless of bios update, sounds like the HS just isn't on right, which is an easy mistake if doing it from inside the case.
 
Do you think I will be ok reseating the HSF without any spare thermal compound? Or should I order some? I was going to update the BIOS last night, but the stupid Microsoft router at my friends house was being a PITA :mad: and I ran out of time. I will try updating the bios today and see if that helps.
 
Ok today I decided to reseat the heatsink, and I'm glad I did!
After I took off the heatsink I looked at the processor and the contact patch that the HSF was making......let's just say it was not a very big one :rolleyes: . So I reseated it and I think it's making a lot better contact now. 48-50c idle temps....But that still seems a little on the high side. I don't really know though because I have never owned a prescott.
 
Thats normal. Glad I was able to help. Just remember to get some grease/paste whatever later and u will drop the temps a bit more.
 
Back
Top