Worth overclocking 7900GT CO?

deadman_uk

[H]ard|Gawd
Joined
Jun 30, 2003
Messages
2,036
Hi, is it worth overclocking my already pre-overclocked eVGA GeForce 7900GT CO? (Take into consideration that I will remain using the stock cooling)
 
If the card is meeting all your needs, no need to overclock :)

If you feel like it wouldnt hurt for a bit more juice, you can always do a mild overclock on stock cooling, just remember the temps will go up a little bit.
 
overclocking rarely leads to much more than 5 more fps (excluding those who unlock more pipes, etc). No it is not worth the hassle.
 
Faction said:
overclocking rarely leads to much more than 5 more fps.
Are we talking a few Mhz on the overclock here?.....or over a hundred?

I can safely say that my overclock got me more than 5 fps :cool:
 
Faction said:
overclocking rarely leads to much more than 5 more fps (excluding those who unlock more pipes, etc). No it is not worth the hassle.

I've gotten a lot more than 5fps. You are on the wrong forums if you don't encourage people to OC
:D
 
Then how much should I overclock? Whats the maximum temperature I should hit? At the moment my card is 47C.

How much should I overclock up to? I am at 500Mhz core clock and 1500mhz memory clock (stock settings). What should I increase it to?
 
deadman_uk said:
Then how much should I overclock? Whats the maximum temperature I should hit? At the moment my card is 47C.

How much should I overclock up to? I am at 500Mhz core clock and 1500mhz memory clock (stock settings). What should I increase it to?

Do a volt mod. My core is around 620. Not sure what my memory is at, I think around 1650.
 
with a 1.5v mod i got my 7900GT's to 700mhz core clock, mind you i had to use vf900's to keep them cool, and they still ran around 55-60c. It's definitely worth it, and i second that if you discourage modding/OC'ing, you are DEFINITELY in the wrong forum. Just be careful with how fast you OC, and do it in increments to check temps and stability. If you notice any artifacting/crashing, you've obviously gone too far. Once you find a good clock speed, give it time to settle in, i would probably run 3dmark on a loop overnight. The memory overclocks easy enough, just expect alot of fiddling around with the core clock.
 
Ok, Im using the overclocking menu in the NVIDIA forcewae settings. I need to know how high the temperature can go before its considered high.

And more importantly, I have an eVGA 7900GT CO and on the box it says...

Core Clock = 550MHz
Memory Clock = 1580MHz


So if thats the case, why does NVIDIA control panel say

Core Clock = 500MHz
Memory Clock = 1500MHz


????????????
 
I've done a mild overclock with my 7900 GT KO. All I did was run the "Find Optimal" overclock in the CP and it bumped the core up to 550 MHz and the memory up to 1600 MHz. I'm sure I can squeeze out a bit more Mhz, but it seems fast enough. 3Dmark06 score @1280x1024 is 5540.

I'm using a Zalman VF700-Cu cooler and it keeps the load temps under 80C on silent mode. It's slightly better than the stock cooler and much quieter. I've seen no artifacting--just pure speed. :)

The VPU will start to slow down once it hits the 130C threshold. I doubt you'll ever see your card go that high with the stock cooler. I'm not sure why you're seeing lower Mhz in the CP. Those are the stock speeds for my KO card. Are you sure you didn't get the 'KO" and not "CO" version of the 7900 GT?
 
Damn, I wasnt aware of the CO superclocked version. The CO superclocked has 550/1580 but the standard CO (what I have) has 500/1500....

Whats the difference between the CO and CO superclocked apart from the clock speeds? Same cooling? Same hardware? Can I safely raise my speeds to 550/1580?
 
The 7900 GT KO is a refresh from eVGA because the older CO model had issues with artifacting due to using crappy Samsung memory. They changed the DDR3 memory to Infineon or Hynix.

You can safely run your card at 550/1580. If you do notice any artifacting then back down the memory speed a bit.
 
Crappy samsung memory? Damn... lol I want a KO now! lol I cant even run the step up program.

But what is the difference between the CO superclocked and CO standard? in terms of cooling and hardware? Do you know?

Ok I will go to 550/1580Mhz and first watch the temperature rise. Then I will try out some games. What exactly is artifacting? Like graphical corruption?
 
Sigh... the control panel only lets me go up to 541Mhz on the core and 1.58GHz on the memory, any higher and it says the test has failed. How come?
 
With a simple vmod - conductive pen trace - and a Zalman VF900 I got my 7900GT to 700/800 <-that I am selling because I got a 8800GTS. If you are hesitant I wouldn't try a vmod unless you know what you are doing and read up on it for a long time to get a good idea of the mod. Its easy and works great but if you do it get some auto masking tape and an exacto knife and mask the area off with tape so you don't F*ck up with the pen's ink. best of all you can remove the mod with some mineral spirits if you make a mistake or want to undo it. you will need a multi-meter.
 
TheGoat Eater said:
With a simple vmod - conductive pen trace - and a Zalman VF900 I got my 7900GT to 700/800 <-that I am selling because I got a 8800GTS. If you are hesitant I wouldn't try a vmod unless you know what you are doing and read up on it for a long time to get a good idea of the mod. Its easy and works great but if you do it get some auto masking tape and an exacto knife and mask the area off with tape so you don't F*ck up with the pen's ink. best of all you can remove the mod with some mineral spirits if you make a mistake or want to undo it. you will need a multi-meter.
No, I dont like the idea of touching the actual hardware. I will stick to software overclocking via the control panel only lol. If anyone could answer the above questions, that would be great.
 
deadman_uk said:
Sigh... the control panel only lets me go up to 541Mhz on the core and 1.58GHz on the memory, any higher and it says the test has failed. How come?
Ignore it and just run it at 550/1580. Then test with 3DMark06 and some games.
 
dark_reign said:
Ignore it and just run it at 550/1580. Then test with 3DMark06 and some games.
I cant do that. If I apply it or OK it, then it says it cant apply these settings until you have clicked the test button. When I click on the test button, it says the test failed. So I cant think of how I can bypass this.

I got it up to 541Mhz but cant reach 550MHz. Does 9Mhz really makes a difference?

Memory is at 1.58GHz (1580MHz)
 
9 MHz isn't going to matter.

When checking for artifacting, look for random white or colered pixels/dots in games. Textures might also distort due to heat/stress.
 
I've been playing Need for Speed Carbon for about 15 minutes using the new settings.

First time I loaded it, the game quit to desktop just before I had a chance to view the menu.
Second time, game to quit to desktop again shortly after double clicking the shortcut.

NOTE: Oblivion has been qutting to desktop a couple of times a day while playing, no idea why it does that.

I had the NVIDIA control panel open both those times but the overclocking settings were applied. I closed the control panel and loaded Carbon again for the 3rd time and its been fine. I dont see any artifacts. I dont have 3Dmark 06 installed and dont really feel like installing it at the moment. I am going to run Oblivion now and see how it goes.
 
Back
Top