Word of warning

mannyman

2[H]4U
Joined
Jan 12, 2011
Messages
2,854
in case some of you dont know you cant scratch your mobo with a screw driver lol just letting you know i did it and the board no longer works, i think its a goner.
 
Bummer. I guess this means the wind chimes case fan mod I was planning is out of the question.
 
I hit my old p5q pro with a screw driver twice when I was working with those awful push pins. It still worked perfectly. There were 2 decent scratches, it all depends where you hit lol
 
I hit my old p5q pro with a screw driver twice when I was working with those awful push pins.

you mean the intel heatsink push pins? when would you ever be pushing down on one of those with a screwdriver? the only time you need one at all is just to unscrew them a quarter turn, which requires very little down force :eek:
 
it was the htpc board i was replacing the cooler on it its a asus p5lp-le mobo and i had to replace the cpu cooler backplate for my new cooler but it came glued on so i pried at it and ended up putting a nice little gash in it behind the cpu but now i can justify getting a new mobo yay
 
Masking tape around the the area you are working with is a good precaution in the future when needing to use a screw driver for that purpose.
 
it was the htpc board i was replacing the cooler on it its a asus p5lp-le mobo and i had to replace the cpu cooler backplate for my new cooler but it came glued on so i pried at it and ended up putting a nice little gash in it behind the cpu but now i can justify getting a new mobo yay

Omg I hate those stick on backplates. I remember my first watercooling build, I was a newb so I just stuck on the stupid thing. Fast forward 2 years I ended up prying it off with a flathead and scratched the hell out of the backside of the mobo, huge gashes, I think I knocked some little square resistors off it. Suprisingly the motherboard still works, XFX boards are pretty resistant. Although I got some wierd signal cutting issues on my monitor but that's probably something else.
 
When they make PCBs, they place a layer of copper on pre-printed pathways using a solution and dipping it in a chemical that makes copper stick to it. Something like that. It was on How it's made on Discovery the other day lol

Anyways if you sever a tiny copper circuit all the way across it will cut the electrical flow off and could render the board useless.
 
It is a good way to void the warranty as well. Back in the day.. 2000 or 2001 I was working at a computer store. One of the techs slipped and scratched a Tyan S1598 board. I bought it for a bargain price of $50.

There were a few traces I had to jumper with strands of wire as well as a few surface mount caps and resistors I had to replace. That board worked for a solid 5 years before it finally died.
 
it was the htpc board i was replacing the cooler on it its a asus p5lp-le mobo and i had to replace the cpu cooler backplate for my new cooler but it came glued on so i pried at it and ended up putting a nice little gash in it behind the cpu but now i can justify getting a new mobo yay

I don't know, those pushpins on the cooler(Xigmatek S1283 or stock I forget) and the motherboard honestly hated me. 1 of the pushpins was broken I think and it seemed to require more force to screw in, lets just say it wasn't a good idea :p
 
Back
Top