Wooooo

F

forrehmmnd

[H]ard|Gawd
Joined
Jan 25, 2007
Messages
1,353
YAY, i got my athlon 64 x2 4400 + from stock 2.2 ghz to 2.8 ghz stable (i think). my divider is set at 166 and the ram is runnning ddr 420.

im idleing at 27 on core #0 and 31 on core #1, havent checked my load temps yet.

i feel so proud :D
 
2.6 Stable
2.75 Stable in windows

This is the best I have been able to do :( What are your other settings?
 
my fsb is at 255 and the multi is at 11
whats your divder at, i could go past 2.55 until i lowered it from 200 to 166
 
I have been trying forever to get 250 fsb. I am currently sitting at 236fsb by 11. I set the HTT to 4x and RAM set to 333.
 
what volts are you running that on ? i also have my ht at 4x. maybe your proc just wont go any further.

update. 2.9 ghz :D :D :D :D
 
forrehmmnd said:
i feel so proud :D
Click to expand...

As you should, sounds like a great oc if it is orthos stable and such!

My comp will run 2.7 but flake out randomly until i add vcore voltage, i don't think its worth overvolting so i run 2.64 at stock volts.

BTW, what mobo you using?
 
surprisingly its not a great mobo, ecs kn1 extreme nforce 4. i shoot for 3.0 ghz today =)
 
/kicks his processor
Stupid 4400+ only going to 2.6 :(

I have tried everything from going to 1.5v vcore, to adding voltage to the ram, to decreasing Ram speeds to 133 and It just wont do much above a 236 fsb.
 
awwww, i couldnt get 3 ghz. wouldnt boot with that no matter what volts etc i tried. 2.9 is good enough tho
 
You must log in or register to reply here.
Back
Top