Won't Boot with Hard Drive

Kero_1116

Weaksauce
Joined
May 5, 2007
Messages
75
I just built a new PC. See my signature for my 4790k build.

Issue is my computer won't boot if I put in the 4TB WD harddrive. But when I unplug it, my computer boots fine. When I plug the 4TB WD hard drive to my older Q6600, it works. I can even format it in windows 7.

By "won't boot", what happens is it will loop on ASUS splash screen. and I could not enter BIOS.

I tried changing the SATA and power cable and different Sata and power port for my 4790k computer to plug in the WD 4tB hard drive but my computer won't boot still.

What's the issue here??
 
Last edited:
Did you use that 4TB drive in your old PC before ? If so, was it formatted while it was plugged on the SI or Jmicron controller ?

I had something similar like this, two fixes that worked for me were:
1. Enable hotplug/swap on your new rig, power up new rig with HDD power plugged but SATA cable disconnected, boot, plug SATA, and windows should recognise it, then reformat, make sure its plugged on Intel chipset SATA controller

2. Format drive and delete all partition using old PC but it has to be plugged on the SATA controlled by the chipset and not any other like the SI or Jmicron controlled SATA on your old mobo
 
Last edited:
Did you use that 4TB drive in your old PC before ? If so, was it formatted while it was plugged on the SI or Jmicron controller ?

I had something similar like this, two fixes that worked for me were:
1. Enable hotplug/swap on your new rig, power up new rig with HDD power plugged but SATA cable disconnected, boot, plug SATA, and windows should recognise it, then reformat, make sure its plugged on Intel chipset SATA controller

2. Format drive and delete all partition using old PC but it has to be plugged on the SATA controlled by the chipset and not any other like the SI or Jmicron controlled SATA on your old mobo

The hard drive is completely new. I am formating as we speak in the old computer with the intel chipset sata. Ill see if it will work.

Thanks!
 
OK. I have a completely different issue now.

When I try to boot up Windows 8.1 install through USB, it would show the windows logo. Then later the loading "wheel" would show. Then the screen would show nothing. Then it will go back to showing the window logo and then later on it will show the wheel. It keeps going in a loop like that.

So what I did was unplugged everything (including video card, i am using the onboard dvi port) except for the SSD drive. I even changed power supply. Still the same issue. However, when I unplug the ssd and try to go through the install, it is just fine.

Is there something wrong with my SSD?? Is there a setting in the mobo that I need to change? it is already set to AHCI

I tried to use another HD, however, i get the same issue i had in my first post. :(

I also upgraded the biods

Thanks for your help guys
 
Well the only thing I can see it been from this point of view, besides that ASUS Maximus VII Hero motherboard that I also have, is that there could possibly be jumpers on the drive that needs to be selected to force it in SATA 2 or 3 maybe I don't know if that's even still need today. There's one thing I know for sure, ASUS Disk Unlocker is a application that allows you to unlock the other remaining storage if you have anything higher then a 2TB drive. If you can't get login, using this application ant going to benefit you and the problem could lye else were, like with the motherboard. Honestly I had serious problems or annoyances with the Maximus VII Hero.
 
Last edited by a moderator:
Back
Top