Got my rig all put together and before i begin to OC I'd like to get all the wires out of the way. Can anyone (esp with the same case) provide tips/pics on how they did it? I'm guessing electrical tape, and running slack cables along the sides taped. Thoughts?
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
-
Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Wire Management Tips - Antec 300
- Thread starter mattm
- Start date
That is about the best I could do without modding. I´ve tied the cables on bottom of the case afterwards. http://picasaweb.google.com/reksut/Antec300Summer08
I haven't totally ran my cables on my 300 yet and I may still do some cutting 
I did however pull all of the front ports and led cables through a small hole in the upper corner of the case to run them down behind the 5.25 bays and the hard drive bays so they are as hidden as possible when viewing with the door open. The hole is pretty small, but with some patience you can get all the cables through there.
I did however pull all of the front ports and led cables through a small hole in the upper corner of the case to run them down behind the 5.25 bays and the hard drive bays so they are as hidden as possible when viewing with the door open. The hole is pretty small, but with some patience you can get all the cables through there.