Windows wont boot with 2nd RAID card

nutt318

n00b
Joined
Nov 27, 2013
Messages
1
First System Specs: CPU-XEON E31235, MB-ASUS P8B WS, MEM-16gb, Windows 7 x64.

So, I have a HighPoint RocketRaid 2680 card is installed and works great setup as JBOD and using DriveBender. Well Its time to add more storage to my maxed out card, the 2680 has 8 - 2TB drives.

A friend gave me a HighPoint Rocket 2720SGL, Installed it, booting into windows and loaded drivers. Come to find out I accidently installed the RocketRaid 2720SGL drivers and not the Rocket 2720SGL (yes there is a difference, the Rocket 2720 has to RAID capability). Well after restarting the server it wont boot into windows. 30 mins later I relize i installed the wrong drivers, boot into safe mode, remove the RocketRaid 2720 from device manager and reboot back to windows it just hangs on the green scrolling progress bar.

So now whenever the 2720 is installed it will not get past the scrolling green progress bar, it just scrolls forever(longest i waited is 30mins). I've tried different pci x slots, upgrading the firmware to the latest version, disabling I3H setting on the card, manually deleting the drive file out of system32\drivers, removing the 2680, etc. One thing I have not tried is installing the card in another machine. However the card does recognize drives that are connected during the boot screen.

I've contacted support and the 12-24hr turn around time only has gotten be to flash the firmware and make sure it was the only card installed with no drives attached.

I'm at at loss as what else to try, does anyone have any ideas on how to get this card to boot into windows?

Thanks!
 
Back
Top