windows wont boot with 2 drives

Hazards

Limp Gawd
Joined
Jan 9, 2003
Messages
343
I just got a SATA drive, kept ide plugged in as a secondary storage drive, enabled the sata controller and set the sata drive to boot first. i installed windows fine, but when it tries to boot, i just get a black screen. no windows loading screens ever come up. if i unplug the ide drive it boots fine, but as soon as i plug it back in it will not boot. i have a wd 120gb sata drive and a 160gb wd ide drive on an abit is-7 with bios revision 20. how can i get both drives working?
 
*update*
figured out that it is enhanced mode causing windows to not boot. if i make the bios run in enhance mode windows will not boot no matter if the ide hard drive is plugged in or not. i can however, plug in the drive, and select the bios to run in sata only mode, and it will boot, but obviously i cant see it in windows, nor can i see any of my cd roms. any help?
 
I had a weird experience with XP and my SCSI and IDE drives. What I did was this, go into the BIOS and for the IDE drive set it to none so that the BIOS doesn't auto detect it.
When Windows boots up, it should show up. It sounds strange, but it worked for me.
 
Back
Top