Windows Server 2008 R2 freezes

Jeroen1000

Limp Gawd
Joined
Sep 17, 2010
Messages
266
The other day, I managed to stream a movie from it which lasted 2 hours. No freeze whatsoever. Today, I stream a movie and it freezes after 10 minutes.

Only notable difference:

- I had a remote desktop session open when it did NOT freeze.

The above is something I have been noticing and seems relevant. Keeping the server occupied with Remote Desktop seems to avoid the freezes:confused:

When it freezes, I get no output on my IP KVM card. I can turn it off using the power button but I can no longer turn it on. I have to press the button on the motherboard to get it running again.

I can find 0.0 in the Windows log and thus, apart from pulling out hardware I'm quite puzzled as to what I can try.
So unless someone has a deja vu, I'll start by removing some RAM and the optical station.
It also holds a HP-SAS expander, an Areca RAID-adaptor and the IP KVM-card.

I really wanted to watch Tron:mad:

Thanks for thinking with me.
Jeroen

edit: I can work on it as long as I want using remote desktop. It won't freeze. It just does not like streaming a movie:) (via shared folder)
 
Last edited:
The only suggestion I can make yet is if it were me I would be testing the RAM. Maybe the streaming causes it to load a module that may be bad or it lacks enough voltage for a heavier load.
 
By freeze do you mean the mouse pointer doesnt move etc?

or do you mean a BSOD.

The 2 most likely culprits are ram and PSU. But it also could be a bad cpu or even hdd.

I agree with the other reply, test ram first. Up voltage if needed.

On my current system with the first ram I purchased I had to up the voltage on the ram controller and ram to stop BSOD's on stock speed, I wasnt even overclocking. The current ram I got works ok on lower voltage on the ram although I have left the IMC voltage upped.
 
Mostly, I just get a black screen. Last time the mouse pointer froze but I could still see my desktop.

I took a different route for now. The case reset and power buttons were routed via the KVM card. From there they head to the motherboard. However, since I power the PC via WOL, I did not attach the KVM cards power adaptor. The power adaptor is only required if you want to start the computer via the KVM card. Or at least, that is what I think.

Not attaching the power adaptor may very well have been the reason why my power + reset buttons failed to respond when the system froze.

The power and reset buttons are now directly connected to the mobo and so far no freezes...Perhaps both issues are related in some twisted way.
 
Back
Top