Windows 2003 VPN access issue

Joined
Mar 27, 2004
Messages
672
Using Windows 2003's build in VPN server. Computers can start initiating connection but after it gets to verify user/pass it waits for a few minutes and then says server is not responsing.

I think it may be the router because if I dial to the severs local IP when on the local network it connects, but if I use the hostname or public IP it fails at this point. To troubleshoot this I set the IP for the machine to be in the DMZ so all ports should be open.

My router is a D-Link DI-612 (got it free).

Any ideas? I'd like to only have the needed ports open and take this machine out of the DMZ since it is also my home domain controller and exchange server.
 
I used 2003 built ISA server VPN feature once. Is this what you're talking about?

Make sure your DNS is configured correctly and that your using forwarders

Make sure you set up a routing table on the ISA server - just use ROUTE ADD to set up RIP protocol.

Run VPN Client Wizard. In the VPN, use a static address pool to assign to the client and test just one client to start with.
 
Jason210 said:
I used 2003 built ISA server VPN feature once. Is this what you're talking about?.

ISA server is a different product and does not come bundled with Server 2003.

Sean - You may want to try a different router or check the settings to make sure VPN passthru is enabled for *inbound* VPNs. If the router is not allowing GRE packets through, the VPN connection will fail.
 
Ah so the router may be blocking GRE packets even though I have it in the "DMZ"?

I'm pretty sure it is the router because any computer on the LAN has no problem connecting.
 
-Sean Casey said:
Ah so the router may be blocking GRE packets even though I have it in the "DMZ"?

I'm pretty sure it is the router because any computer on the LAN has no problem connecting.

Yes, even if you place the server in a DMZ, if the router is not passing GRE packets, then the VPN will fail.

You may want to try flashing to the latest firmware. If that does not work, try a different router.
 
SJConsultant said:
ISA server is a different product and does not come bundled with Server 2003

Well, it was a while ago. In the end we got rid of it and bought a proper firewall.

SJ Consultant. There's another kind of connection one can do with Windows 2003, that we had to do once before we configured the CISCO. It was like a VPN connection but it required someone standing at the server end to grant access to the caller, so he could use the remote desktop. This was before the firewall was configured. What's that called?
 
Jason210 said:
SJ Consultant. There's another kind of connection one can do with Windows 2003, that we had to do once before we configured the CISCO. It was like a VPN connection but it required someone standing at the server end to grant access to the caller, so he could use the remote desktop. This was before the firewall was configured. What's that called?

Sounds like Remote Assistance. But since RDP is an encrypted protocol, it doesn't require a VPN.
 
Back
Top