Windforce 970 G1 rotated on Silverstone case?

gdourado

n00b
Joined
Nov 7, 2014
Messages
57
Hello, how are you?

I am wondering if anyone is running either a 970 or 980 from Gigabyte with their windforce 3x cooler on a Silverstone case where the motherboard is rotated 90°?

Any issues?
I read on the Web that graphics cards with custom cooling solutions based on heatpipe can have issues when operating rotated.

This is the cooler on the windforce 970:
Image_04S.jpg


Any input on this?

Cheers!
 
I've had stacked 670s wf3 in my rv02 case. Temps were great. I wouldn't worry much since you have at least 2 180mm fans forcing air up and out.

Edit: by stacked I mean 1 pciE 1.0 in the middle, but room between was still slim making the 1.0 slot unusable. I've also had x2 classified 780s in same configuration and temps did not go above 80 (mild-aggressive OCing).
 
Last edited:
Thank you for your reply.
What worries me about the windforce 970 is that it has the heatpipes running along the pcb and the fins will be pararell to the ap181 fans.
From what I read, these are the main problems with 90° rotation, because the heatpipes will struggle gravity and the fins won't allow air to run though.

Cheers
 
Back
Top