Win 7 dropping network connection

aubsxc

[H]ard|Gawd
Joined
Jun 2, 2009
Messages
1,131
I'm running Win 7 and Ubuntu 9.04 on an Intel box with a Gigabyte ga-ep45-ud3p board (booting off separate drives). Over the last week or so Win 7 has started to randomly drop its connection to the router (direct wired connection, no switches). The only way to reset the connection is to power the router down briefly. I haven't been able tie this behavior to any specific program or install I've done recently, and I have zero problems with network connectivity in Ubuntu where I spend a majority of my time, so I know its not a hardware problem. Any ideas to fix this would be appreciated.....
 
Yes, the router is doing DHCP. The router also shows an IP assigned to the computer after Win 7 has dropped the connection. The connection cannot be restored with ipconfig.

Another weird thing I've noticed is that the clock in Windows will get messed up when I boot into Win after a restart from working in Linux. That will resolve when I manually force Windows to sync wth an internet time server.
 
I've been having a similar problem where the conection just drops randomly. I haven't been able to figure out a reason for it. I just right-click on the Network icon and select "Troubleshoot Network Problems" (or something of the like). After 30 seconds or so, it fixes the connection saying the "Default Gateway could not be found" was the problem.

I'll try StarsFan4Life's suggestion this evening and see if that fixes it.
 
In my particular case it sometimes loose connection from Wifi router and I have to restart it
 
Basically what is happening is that the network adapters have a "power save mode" enabled on them by default. Turn this stinkin feature off.......
 
Basically what is happening is that the network adapters have a "power save mode" enabled on them by default. Turn this stinkin feature off.......

Ok, I'll check it out tonight. Is the power saving feature accessed through the device manager or BIOS?
 
No sir, its in the properties of the adapater. Right click on the properties and I think it's one of the top tabs. I will look when I get home.
 
I turned Power Management off on the network adapter and so far so good! Thanks for the tip.
 
Well, I thought I had it all figured out by turning off the Power Management features, but last night my connection kept dropping time after time again. Before, I was able to repair the connection and it work fine for the rest of the time the computer was on.

The only way I was able to fix it was by plugging in my ethernet cable into the other ethernet port on my motherboard. Never had anymore problems the rest of the evening. Could this be a port that is finally going faulty?

I just find it odd that that error message is "The default gateway could not be found" whenver I repair the connection.

If it continues, should I look into trying another port on my router? Re-install the drivers? Change the ethernet cable?
 
Well, I thought I had it all figured out by turning off the Power Management features, but last night my connection kept dropping time after time again. Before, I was able to repair the connection and it work fine for the rest of the time the computer was on.

The only way I was able to fix it was by plugging in my ethernet cable into the other ethernet port on my motherboard. Never had anymore problems the rest of the evening. Could this be a port that is finally going faulty?

I just find it odd that that error message is "The default gateway could not be found" whenver I repair the connection.

If it continues, should I look into trying another port on my router? Re-install the drivers? Change the ethernet cable?


Couple of questions:

What kind of router is it?

Have you tried a different port?

Are you using the default Windows 7 drivers or the drivers downloaded for the nic?
 
I use a Linksys WRT54GS v1.1 as my router. I have the Tomato firmware installed. Haven't ever had a problem with it. In fact has made my connection much better. I did however recently upgrade it's version (Past 2 weeks or so now).

I haven't yet tried a different port on the router.

I am using the latest drivers released from nVidia for Windows 7 x64.
 
Do you have another router you can use/test with?

And dude....try a different port already...

I believe I may have one lying around somewhere.

Haha, I tried another port on my motherboard and its been working fine since then. Like I said, I'll try another port on the router if it happens again. ;)
 
You didn't mention you had multiple ports on your motherboard. I hate motherboards like this. Is that an NS7 board?
 
Back
Top