Willn't boot at 166 but will at 133

dylan

n00b
Joined
Jun 9, 2004
Messages
45
So I have a shuttle AK38N, it uses a VIA KT333CF NB and VT8235 SB. I have updated the BIOS to the latest version which support the Sempron but when I set the jumper on the mainboard to 166 FSB the system will not boot. I have PC 2700 Ram. I don't know what to do. Any ideas would be helpful.
 
Try clearing cmos after the flash. Mayve you did that but forgot to set the jumper back to the "retain settings" position.
 
I reread how to clear the CMOS I forgot to remove the ATX conection from the motherboard that fixed it for the next time I booted it detected the right CPU.
 
Back
Top