Will 1 or 2 artifacts perm damage a card

GreyMatterTripp

Weaksauce
Joined
Oct 2, 2006
Messages
96
I have a X1900XTX 512 ATI built Radeon card and I was recently playing FEAR after install and had artifact issues, small shadows sticking in vision and black planes occuring out of nowhere. 3 or 4 occasions total and card never got above 75C. I am now running the fan VIA ATI Tool at 100% which keeps it at 49C load and FIXES ALL ARTIFACT ISSUES. I downloaded a patch for DirectX9.c october but will probably not install as card is working wonderfully. My question is: Does a few instances of artifact errors cause unseen permenent damage to the Video Card??? If it does I'll RMA it but It looks perfect now and it runs smoothly only reaching 49C at tops!!! ;)

Any one know about this issue???
 
Theres no problem, once artifacts go away there is no more damage to the card. You can think of artifacts as a warning that something bad may happen. But if you arent seeing them anymore the card is fine.

Go ahead and install the DX patch
 
Haven't seen them since I turned the fan up and the game runs without the choppy lag that it had before, very much happy. Its like playing it on a different system. Man they have got to work on the fan control thing for games. I know it says Nvidia is the way its meant to be played, but to almost sabotage my ATI card by not programming the FAN to kick in (it only lacked power in this game not OBLIVION). So if I don't see the dots, flat planes in air and sticky shadows that means my MEM is fine right. Because if I understand right this is the most easily and frequently damaged component of the Video Card.
 
Hrm...

Now, I may be wrong, but I dont think the game controls fan speed, that should be controlled by video drivers or other drivers you have on your system. So to blame the game for not turning on your fan is in error.

-Ashley
 
JackAshley said:
Hrm...

Now, I may be wrong, but I dont think the game controls fan speed, that should be controlled by video drivers or other drivers you have on your system. So to blame the game for not turning on your fan is in error.

-Ashley

yeah. It works exactly like your CPU fan. Once it hits the CPU hits a certain temperature, the Heatsink responds with higher RPMs. Same goes with GPUs. I always kept my X800GTO at 100% fan speed though, since I never cared much for the amount of sound the fans produced and it kept the GPU cool.
 
What your saying would seem to make since given the fact that I've read the same thing. Yet my experiance differs. In Oblivion as soon as I hit 3d graphics the fan kicks on so you can hear it. No time during FEAR until I turned it up did it kick on. Whisper quite. The artifacts would appear after 1 maybe 2 minutes of gameplay and only happen for a matter of secounds and then I would quit the game and the temp would drop from the upper 70's back down to the mid 50's. Now with the fan overrided and at 80-95% the card only gets 52C on load after playing the game for a short while and its much louder but no stuttering and no more artifacts at all. (though I'm carefully looking, one hand on the case ready to pull that bad boy out for a RMA if neccessary) So now with no overclocking and 1GB of RAM, until I get my secound GB tommorow (Corsair XMS series), the game runs very smoothly at high detail settings and a couple settings turned to medium to improve FPS, can't wait until I get the secound GB I can turn all the settings up and blast the fan at 100%. The X1900XTX comes equipped with overclocking features but doesn't really need them. Heat is one issue and would force you buy a 3rd party solution for the heat load if you overclocked on a game like FEAR. So you see why I say that FEAR is in danger of frying X1900XTX's. I've read similar threads with the same problem with this card and this game, but they all say it stresses the card too much which is true but not the cause of the problem let me elaborate.. If what you where saying was true jack and stealth and some kind of dynamic temp/fan speed control where still functioning during playing FEAR than the temp would have caused the fan to kick in like in Oblivion and would have prevented artifacts(kept the temp that keeps it stable which can not change from app to app). In fact it did not do this and almost killed my card. Maybe it blocks the video bios I don't know but the fan didn't kick in during FEAR but was fine in Oblivion that really only leaves one plausible possibility.
 
Back
Top