TheBluePill
2[H]4U
- Joined
- Aug 17, 2005
- Messages
- 3,773
Here is a question that has been put to me and I belive I have the answer.. but i thought I would ask some of my fellow OCPers about it..
I have a server room with 5 Poweredge servers, several large UPSs, 10 Catalyst Switches and an HP K Class 9000 server..
I Keep the thermostat set at 60 degrees and the room stays fairly cold.
Management wants to "cut costs" and wants to know why we can't set the temprature to 70 or 75 degrees in the server room. (which is madening to me).. But they don't want an "If" or "Could Extend drive life." etc.. they want a hard reason why I want the server room to be as cold as possible..
So far, my research tells me that the Operating Temps of my PE Servers is 50F to 95F and my HP is 68f to 86f.. I also have 1400w worth of Power supplies in each PE and a fairly large requirement for the HP. That is not counting all of my Cisco Gear putting off heat in my network cabinets..
So mathmatically, how can i give them some hard data to confirm just what temprature I should have my server room, with a reasonable margin for safety?
I have a server room with 5 Poweredge servers, several large UPSs, 10 Catalyst Switches and an HP K Class 9000 server..
I Keep the thermostat set at 60 degrees and the room stays fairly cold.
Management wants to "cut costs" and wants to know why we can't set the temprature to 70 or 75 degrees in the server room. (which is madening to me).. But they don't want an "If" or "Could Extend drive life." etc.. they want a hard reason why I want the server room to be as cold as possible..
So far, my research tells me that the Operating Temps of my PE Servers is 50F to 95F and my HP is 68f to 86f.. I also have 1400w worth of Power supplies in each PE and a fairly large requirement for the HP. That is not counting all of my Cisco Gear putting off heat in my network cabinets..
So mathmatically, how can i give them some hard data to confirm just what temprature I should have my server room, with a reasonable margin for safety?