Why Cant I Oc My Dell?

silentnight3985

Limp Gawd
Joined
Nov 4, 2003
Messages
290
I have a older Dell optiplex gx1 with a 333mhz PII processor in it that i cant oc,i tried setting the jumper to the next setting (350mhz) and it boots up showing only 266mhz..what's the problem? Bios V is A10
 
Why would you want to overclock that?

It may be time to start looking for a new computer if that is what you are using...

Just for kicks, do you know the make and model of the Mobo in there?
 
Originally posted by silentnight3985
Why Cant I Oc My Dell?

Because its a Dell. Period. End of story.


Seriously, it's because Dell uses proprietary hardware, including motherboards that lack any and all overclocking features.
 
My computer is this:
ENIAC-1
600 vacuum tubes:eek:
3 Hz, overclocked to 3.2 Hz:cool:
No ram
No os
No hard drive
Warcraft III runs just fine, only a little laggy!
 
What did this guy ask? I dont think he asked anyone if he should overclock his dell, or if you think he needs to upgrade. I believe he asked why couldn't he overclock it.

TTP: I havent any clue as to why your CPU bumped down to 266 after you changed that jumper, doesn't make mathematical sense to me. But whoever said "you can't" is more than likely correct. OEM's don't use motherboards that are oc friendly. You might want to see if there is a jumper on that mobo that bumps the FSB up to 100mhz from the 66mhz its at now. That would move that chip up to 500mhz. Who knows, the chip might be able to handle it. Good luck.
 
Hello,

You can overcock your Dell with software. Do a search on Google for CPU FSB programs. I saw a few sites before with these programs but unfourtanatley I dont have any URL's

Overclocking the system via jumpers even on a Dell would probally work. The reason it is only booting at 266 is because all P2's 333 Mhz and under run at a 66Mhz bus. The P2 350's and on ran at 100 Mhz. You might be able to get away with putting in a Celeron up to 550 Mhz with a bios flash.

The older Celerons used to rock! They were like the Pentium Pro in the sence that the cache ran at the same clock speed as the processor whereas the P2's ran at 1/2 the clock speed. I have a Dual Celeron (2X466@601) system with 512 MB of ram , Geforce Ti 4200 128 and Windows 2000 server and Mandrake 9.2 and it runs like a champ.

Hope this helped. Good Luck!

Zachary
 
i have a PII 400 comming in a few days,and there is a jumper i can remove to bump the fsb to 100mhz,i pulled it but had no change,my best luck came from putting pc133 ram in it,now as far as "upgrading" i have no need to,i have plenty of computers that have 2ghz+ in my shop and house,i love this dell because its so damn simple,and cheap,so if i cook this one i dont care.I will try the over cooking..opps i meen over clocking:D software search thanks for the tip.As for the bios i have the latest one for this mobo A10..was A04 when i got it.
 
Originally posted by sgi02
Hello,

You can overcock your Dell with software. Do a search on Google for CPU FSB programs. I saw a few sites before with these programs but unfourtanatley I dont have any URL's

Overclocking the system via jumpers even on a Dell would probally work. The reason it is only booting at 266 is because all P2's 333 Mhz and under run at a 66Mhz bus. The P2 350's and on ran at 100 Mhz. You might be able to get away with putting in a Celeron up to 550 Mhz with a bios flash.

The older Celerons used to rock! They were like the Pentium Pro in the sence that the cache ran at the same clock speed as the processor whereas the P2's ran at 1/2 the clock speed. I have a Dual Celeron (2X466@601) system with 512 MB of ram , Geforce Ti 4200 128 and Windows 2000 server and Mandrake 9.2 and it runs like a champ.

Hope this helped. Good Luck!

Zachary

Are you serious? CPU FSB will work on a Dell? That's blasphmey! Although, wouldn't an older Dell be limited by PC133 RAM?
 
I just used the new cpu id software and it told me my processor IS locked...ohh well,the 400mhz cpu will be here soon and then ill try some over cooking on it:cool:
 
Originally posted by silentnight3985
I just used the new cpu id software and it told me my processor IS locked...ohh well,the 400mhz cpu will be here soon and then ill try some over cooking on it:cool:

YOu can unlock some PII slot 1 CPU's. After 233 mhz, all Intel CPU's were locked. You can bump up the FSB assuming the board allows it. A 400 mhz PII is going to be harder to unlock and overclock than a 350 mhz PII.
 
you cant unlock an intel processor. They are die locked, which means when the cpu die is being made they lock it then and there. However there are what are called engineering samples which are unlocked. look on ebay for them
 
corrosive is right I think some came unlocked if you were lucky but you cant change it if it is locked I did read some where that they had a modded bios for dell to oc. I have seen the software program it didnt work on my sister in laws dell but hey it doesnt hurt to try she had a 8200 by the way.
 
Originally posted by corrosive23
you cant unlock an intel processor. They are die locked, which means when the cpu die is being made they lock it then and there. However there are what are called engineering samples which are unlocked. look on ebay for them


you can change the mutli on slot 1's with careful wiring
 
Originally posted by kennyc28
corrosive is right I think some came unlocked if you were lucky but you cant change it if it is locked I did read some where that they had a modded bios for dell to oc. I have seen the software program it didnt work on my sister in laws dell but hey it doesnt hurt to try she had a 8200 by the way.

Yeah that is right. It was all pre-August 1998 P2 Deschutes CPUs (266-450MHz), and all Klamath P2s (233-300MHz) that came unlocked.
 
There was a way to cover one of the socket fingers on the slot1 CPUs that would allow them to be overclocked. I tried it on my 333 Celeron, but the board itself was the problem.
 
Mav, that pin was B21, and all that did was up the voltage to the processor. I tried it once, didn't get it to work.
I do have a PII 300 that is unlocked. Fastest I've had her was 2.5 x 140 going at 350. I'll tell ya what, PII's on a high fsb...is hella sweet.
 
if you hook up 110v to your mobo, you would REALLY overclock that dell to where it will start to shoot out flames and blow up. but for the first 5 seconds you had the fastest dell known to the overclockers of the world
 
ok well i guess ill get a powerleap kit and go 1.4ghz with it,or ill try that bios deal,where can i get it?
 
Originally posted by Fark_Maniac
Mav, that pin was B21, and all that did was up the voltage to the processor. I tried it once, didn't get it to work.
I do have a PII 300 that is unlocked. Fastest I've had her was 2.5 x 140 going at 350. I'll tell ya what, PII's on a high fsb...is hella sweet.

I'd love to have my dual PII's back at 400. :( 133 FSB was great. I'm not sure if it's the CPUs or a stick of PC100 holding me back
 
i have pc 133ram in mine,is blocking that pin on the processor worth the try?if so can some one give me a pic of the pin i need to cover?
 
Originally posted by Grizzy
Because its a Dell. Period. End of story.


Seriously, it's because Dell uses proprietary hardware, including motherboards that lack any and all overclocking features.
 
Nobody has answered the original question yet... Dell computers aren't overclockable because then people don't have to upgrade as often. Less upgrading = fewer sales for dell.
 
whats a P2 ? LOL

I've got 2 old P2's... a 350 & 450 want to buy one.... or some old sticks of PC100 3-3-3 ??!? I didnt think anyone still used that crap!

hint: trash bin isnt just an icon on your desktop.
 
my mom's comp was a gateway 266mhz PII, slower than shit, took 10 honest-to-go minutes to boot win98 - and that is WITH extra ram (96mb, w00t) and very few items starting up (basically just nortons anti-virus)

since then, it has been upgraded to an AMD XP2200, ABIT AN7 mobo, 512mb dual channel ram, and an ATi Rage 128 32mb vid card - for UNDER $300...... go upgrade

however, if you don't want to upgrade, just start connecting random pins and soon enough you'll have a new keychain
 
Originally posted by kllrnohj
my mom's comp was a gateway 266mhz PII, slower than shit, took 10 honest-to-go minutes to boot win98 - and that is WITH extra ram (96mb, w00t) and very few items starting up (basically just nortons anti-virus)

since then, it has been upgraded to an AMD XP2200, ABIT AN7 mobo, 512mb dual channel ram, and an ATi Rage 128 32mb vid card - for UNDER $300...... go upgrade

however, if you don't want to upgrade, just start connecting random pins and soon enough you'll have a new keychain

dude if he makes key chains i want a few
LOL!
dell = HUGE PIECE OF SHIT!!!!!
 
Back
Top