Why are my temps so bad?

Nick_Leo

[H]ard|Gawd
Joined
Jun 26, 2007
Messages
1,631
ive got a double rad then a singe right after it and ive got the fans under volted to 5v so there silent. so far ive bleed for about 2 hours all together over a region of overnight sitting while its filled. my temps are 50C for my 8800gts at stock and my e6850 at stock is 50 and 44C of the cores via coretemp. y are they so high?
 
If you have a radiator that can handle a low rpm fan then you will be able to get decent temps even with the lowered down rpm. However if your radiator requires a high output fan then that is the main cause of why you're not getting good temps.

Also make sure that all contacts are good on your parts.
 
How about some details, like what you have for a pump, CPU cooler, GPU cooler, and radiators?
 
I'm not running a GPU loop, but with my setup I idle at 38-40 C and load at 60-63 C.


Swiftech MCP655
2x HL Black Ice GTS 120s
D-tek FuZion no nozzle or washer
EK MultiOption 250 Res
7/16" Tygon

1x Scythe 120mm 1600rpm fans at 12V on each rad, extra Scythe on rear rad speed dependent on CPU temp.
 
well i put the yate loons back at 12v and they sound like jets and makes me unhappy but temps are good.

Therefore lack of airflow was probably a large factor. There may be others, poor flow or something.
 
You were crying about 50 C at 4ghz and NO AIRFLOW?

no it had the same amount of air flow as it does now that ive got the fans back at stock V. the temps are somewhat better, still never thought that the 8800 would dump that much heat even with another rad.
 
Back
Top