WHS with SSD for OS drive?

[LYL]Homer

Supreme [H]ardness
Joined
Jun 7, 2004
Messages
4,209
Anyone doing this? Is it any more responsive? Via RDP? Via WHS console? What drive are you using? WHS v1 or Vail?

I'm considering this if there is a noticeable bump in performance, though I wonder if the DE architecture negates any real advantage. And I'm also just taking a look at the power usage of my WHS setup.
 
I honestly do not have experience with SSD drives but I can tell you from what i've learned they provide a performance boost most noticeably during boot. I don't think that in a WHS setup however - that the performance would be jaw-dropping.

In the case of stability and reliably I would say it would be a good investment (if you don't mind spending an arm and a leg to keep up for windows Vail approx $400 for 160 gig) because you have that much less to worry about.

For power usage let me quote a comment from: http://www.tomshardware.com/reviews/ssd-hdd-battery,1955.html

"That is the trick in marketing SSDs. If you plainly compare IDLE and LOAD wattage, yes, SSDs SHOULD be using less energy than conventional platter drives. But what you have forgotten is the read/write performance. You have to count that in when measuring power consumption."

Might be easier to get a cheap WD Green drive
 
I've got an Intel 80GB G1 as the OS drive in my production WHS. It does boot a little faster, though not as fast as my desktop w/SSD due the SAS boot algorithm. I did it simply because I had my WD Black that I was using as the OS drive fail. I haven't seen any speed difference other than during boot.
 
I have played with this, there is a slight difference when you remote in and do stuff manually both via remote desktop and KVM-over-IP.

Honestly though, the OS drive does not get hit that much. What might be cool is RAID 1 Seagate hybrid drives.

Not worth the price IMO so I swapped the mirrored SSDs out.
 
Back
Top