Which Winchester to buy?

hkhawk

Limp Gawd
Joined
Aug 17, 2004
Messages
216
Alright, time to upgrade and I've decided that getting a Winchester is the way to go. 939 dual channel, 90nm process, and overclocks through the roof sound pretty good to me. But here's the question, which one should I get? I mean, I have seen impressive overclocks from each one. It seems like all three pretty much max out at the same point, somewhere around 2.6GHz or so. But obviously not all chips are made the same. So do you think a 3200+ or a 3500+ will offer a better chance of a strong overclock or do you think they're all pretty much the same? Other than price, is there any reason not to get a 3500+ (I mean based purely on performance)? It seems as though the 3200+s are the most popular. Please any suggestions/comments/experiences are welcome! :)

Happy New Year! :)
 
excaliberpc has them and ppl seem to be gettting 2.7+ out of it. i think it was the 3200+ version or 3400+
 
If I was to do it over again, I would get the 3500 90nm. Yuo get a extra multi that way and they OC just as well as the others. Last I saw, Newegg and Monarch both have them in stock.
 
3000+ are the best bang for the buck, cuz they all do OC just to about the same point like you said, unless you got vapor cooler's or soemthing on them. Just use a 3:2 ram divider and you can get the mem down to around 200mhz stock speed.

3000+ ownz you.
 
if your getting or have great ram get the 3200 (the 10x multiplier helps for 1/1 performance)
get the 3500 or 3000 if you are getting or have decent ram.
max out your ram on the 3500 with a 1/1 ratio.
you will have to use the divider on the 3000. (even if its great ram)
DO NOT USE GREAT RAM ON THE 3500 (IT IS A WASTE OF $$$) (both ram and chip)

They will all max out to around the same overclock...

I'm running my 3200 at 270x10 1/1 (2.5,3,3,10,1t)

if I could do it again. I'd get the 3000 and great ram (save $100) when the fx55 is <$250 i'd upgrade. (nah i like my 3200 @ 2.7 at 1/1)

just my opinion...
 
Back
Top