Which power cable should I use?

YelloFelloJP

Weaksauce
Joined
Jan 7, 2004
Messages
66
I'm building a system with a Corsair 620w PSU and ASUS P5K Deluxe mobo. I'm planning on overclocking my e6750 w/ a scythe heatsink, 2gb Corsair XMS and 8800 GTX.

My question is this:
The mobo supports both 4-pin ATX12V and 8-pin EPS +12V power plugs. Which should I use? What is the difference between these two cables?
 
If your PSU has the 8-pin connector, USE IT. One is old, the other is new... the other is an extension of the old one, so it'll work either way. However, the newer one is obviously to deliver more power to the system, so it would, of course, be better to use the newer 8-pin cable.
 
Thanks for the input, but could you elaborate on what the difference is between the two different options? Both cables supply the same 12v, do they not?
 
The 8pin plug can provide higher max amperage, which is preferable with modern hardware. There is absolutely no reason to ever use the 4 pin plug if you have the 8 pin as an option on your PSU. (and your motherboard supports it, of course)
 
My psu and mobo has both the 4 and 8 pins. I built mine I plugged them both in. Any problems with doing so?
 
If your PSU has the 8-pin connector, USE IT. One is old, the other is new... the other is an extension of the old one, so it'll work either way. However, the newer one is obviously to deliver more power to the system, so it would, of course, be better to use the newer 8-pin cable.

Thanks for the input, but could you elaborate on what the difference is between the two different options? Both cables supply the same 12v, do they not?

What about "more power" do you not understand?

The 8pin plug can provide higher max amperage, which is preferable with modern hardware. There is absolutely no reason to ever use the 4 pin plug if you have the 8 pin as an option on your PSU. (and your motherboard supports it, of course)

P = VI, power = voltage * current... more current = more power. Current is measured in amperes. Is that elaborate enough?

My psu and mobo has both the 4 and 8 pins. I built mine I plugged them both in. Any problems with doing so?

How did you plug both in? What board do you have?
 
What about "more power" do you not understand?

If the 8 pin and the 4 pin both provide power only for the CPU, how does the 8 pin provide a benefit over the 4 pin? If you have a Cxx processor, then it consumes less power than the old P4 Extreme (for which the EPS standard was set up).

If you only need the power supplied by the 4 pin (as all Cxx processors do) then using the 8 pin provides no extra benefit.
 
Back
Top