Which motherboard?

TTKGeek

n00b
Joined
Apr 1, 2005
Messages
7
I'm building a C2D E6600 box soon, and wanted to know which is the best motherboard that will last me a long time?

Abit AB9 QuadGT, MSI P6N SLI Platinum, or the Intel D975XBX2?
 
QuadGT & the Bad Axe 2 are both very good boards & mature, imo nF6xxi is still buggy.
 
Intel belongs on Intel...stay away from Nvidia, they are great though but require skill to set up....

If you want to do some overclocking at or obove 400FSB get the P965 models, if not get the 975 badaxe which is faster clock for clock then the P965...

My P5W was limited to 435Mhz with all MCH settings at max, the board died gradually after 4 months... got a P5B Dlx great overclocker (450mhz easily) and megastable too, now on the Striker (same 450mhz) , great board , nice ram overclocks but very difficult to setup and bios needs some more work, P5K Dlx now better and more easier board then the Striker, it's a perfect combo of the P5W and P5B...

And why not the P5K vanilla or MSI P35 , or the gigabyte version ? the seem a better future proof option here...
 
I'm now looking at the P35 boards, which is better between the Gigabyte GA-P35-DQ6 and the Asus P5K Deluxe?
 
I would probably go for the Asus of those 2 but you might also want to look at the abit IP35 Pro ...
 
I'm also still looking at the MSI P6N SLI Platinum, there's a 70+ page thread here - so I'm assuming it's very popular?
 
Intel belongs on Intel...stay away from Nvidia, they are great though but require skill to set up....
...


My MSI P6N 650i was not difficult to set up at all (where from what I've seen around here, the 680i's probably fall more into that category with their wealth of OC/bios settings.) My P6N / E6400 combination was very stable and easy to get a modest OC from a 2.1 to 3.0 Ghz.
 
Back
Top