which amd x2 chip overclocks the best?

robman_rob

Limp Gawd
Joined
Mar 7, 2006
Messages
273
i want to know which chip for the amd x2 series overclocks the best

like 3800, 4400, 4200, 4800...

AMD Athlon 64 X2 3800+ 2.0GHz Dual Core Socket 939 512K L2 Cache
AMD Athlon 64 X2 4200+ 2.2GHz Dual Core Socket 939 512K L2 Cache
AMD Athlon 64 X2 4400+ 2.2GHz Dual Core Socket 939 1MB L2 Cache
AMD Athlon 64 X2 4600+ 2.4GHz Dual Core Socket 939 512K L2 Cache
AMD Athlon 64 X2 4800+ 2.4GHz Dual Core Socket 939 1MB L2 Cache

thanks!
 
I do not know the answer to your question.

But with the 4800+, you can reach FX-60 speeds on air cooling easily.. with 1MB of cache too.
 
Opty > Athlon

29ghz.jpg
 
robman_rob said:
i want to know which chip for the amd x2 series overclocks the best

like 3800, 4400, 4200, 4800...

AMD Athlon 64 X2 3800+ 2.0GHz Dual Core Socket 939 512K L2 Cache
AMD Athlon 64 X2 4200+ 2.2GHz Dual Core Socket 939 512K L2 Cache
AMD Athlon 64 X2 4400+ 2.2GHz Dual Core Socket 939 1MB L2 Cache
AMD Athlon 64 X2 4600+ 2.4GHz Dual Core Socket 939 512K L2 Cache
AMD Athlon 64 X2 4800+ 2.4GHz Dual Core Socket 939 1MB L2 Cache

thanks!


Psycho said:
Opty > Athlon

2.9ghz.JPG

haha
 
if your asking for most headroom, my X2 3800 did 2500mhz on stock voltage, but my Opteron 165CD does 2.6ghz on stock voltage :) 800mhz OC on default voltage = good!
 
toddm27 said:
I'd second that as my 165 does 2.8 on stock voltage. :D

psycho claims his does 3.4, yet puts up a 2.9 shot because "his ram is bad" all of a sudden.
 
Stop bickering...you give the AMD forum a bad name.

Anyhow, I would recommend an Opteron over an X2 anyday. They overclock much better. Is there any reason you want to only take an X2?
 
Tutelary said:
psycho claims his does 3.4, yet puts up a 2.9 shot because "his ram is bad" all of a sudden.


Oh my god. You're going to flame me because i had a ram stick go bad? :rolleyes:

It's doing 245 with POS kingston memory. Give me a few days and i'll be back up to speed
 
brighton said:
thx for lagging the thread lol

and whys your ram running so slow ?
np and that was just an early test with it and I set the ram to 1/2 divider to start playing as I didn't want to mess with figuring what divider to use, haha laziness at its best :p , it does a strong 270 but anyway, lagging fixed
at least until someone quoted it lol
 
The 2006 X2 3800+s have been really good clockers. Get one. Most will do 2.6-2.9Ghz with the exception 3.0Ghz chip :)
 
my price range is 2500 for a whole system including a 20 inch widesceen monitor (monitor expensive :( )

so that puts the cpu around 400-500ish ?

I thought Opteron was for servers... so that is why I was going to get an X2
 
robman_rob said:
my price range is 2500 for a whole system including a 20 inch widesceen monitor (monitor expensive :( )

so that puts the cpu around 400-500ish ?

I thought Opteron was for servers... so that is why I was going to get an X2
just make sure your looking for socket 939 opterons and your all good
 
My X2 3800+ does 2.5 at 1.45v... 2.6 may be stable with tweaking, 2.7 stable is out of the question without more than 1.55v or more cooling.


I'm only using the POS stock cooler so 2.4 is my max. My friend has a X2 that maxes out around 2.5, my other X2 didn't even hit 2.1 stable.
 
get a opty 170 for $400

if you're really looking to cut some cost then the X2 4200 (some will disagree but thats ok)
 
The question should be asked: "which stepping overclocks best?" not which CPU, otherwise the answer is easy: the FX60. CPU's you should be on lookout for is: X2 3800 LBDH 0601s, CCB1E 0550s and 0608s.

Since folks like to "show" their overclocks in this thread, here's my obligatory 0608 overclocks:

3.0GHz @ 1.47V Thermaltake Big Typhoon :
stranx44


But honestly, I am more proud of it doing this: 1938MHz overclock at 0.99V
sp04-1938.jpg
 
BTW> Don't get caught up in the X2 vs. Opty 165 hoopla. Anyone that has enough experiences with both, knows they overclock similarly given again the right steppings. My old X2 3800 0601 was particularly a great OCer, better than my present Opty 165 in many ways:


sp24-2900cnq-a.jpg
 
Psycho,

Although I have few posts here, I have been clocking for over ten years now and have run into many gems. TEC's, Prommie's, massive air, kinda hit it all in my time.....

However, after extensive research, I have yet to find any AMD core running on stock cooling @3.4 or above.

Even if you did get the 3.4, I can flat out guarantee it is not stable, but you can prove me wrong with proper postings.......8 hours of prime blend would be sufficient, a suicide screen shot doesn't qualify with outrageous claims like yours.....

And, if you have crappy ram right now, you can still get a total clockage shot with a ram divider, so your claims as far as I am concerned are bogus......

If you are trying to inflame people with your postage, you doing a good job, but still haven't 'proven' anything............

whatever,

baldy
 
$500ish for a processor.. The top of the line X2, the 4800+ is $630 on newegg.com
Its the fastest along with the 1mb of cache.

Maybe you should change the topic title to "Which Opty and X2 overclocks the best'
since everybody is bragging about their 165/170s :p
 
I am not much of an overclocker but I messed with my x2 3800 last night and was not able to get it to 2100mhz without it crashing.

Haha
 
Manchesters seem to be the better overall oc'ers. If money is nto really an option FX60 is of course the best but the 4600+ will serve you well. LDBHE 0540VPMW. They clock like champs and have little or no coldbug if that matters.
 
so for a gamer that's never overclocked before, but interested in overclocking for the first time

which chip? opteron or x2 and which one in that series?
 
How much would you like to spend is the first question. From there it will be much easier to help you decided.

EDIT I just noticed you left about 400-500 for cpu. I would cut backa little in the cpu area and go for a 4200+ and spend the difference on better ram or gfx, gfx would probably serve you best.

I'll go put a little thing at newegg together for ya
 
Here is what I would go with. Prices are off of newegg so some shopping around wouldn't hurt. Ram is from tankguys.com

Lian Li PC 7 B
A64 X2 4200+
Team Group pc4000 cronus 3-3-2-8
Dfi SLI-D
2x7900GT's
Seasonic 600watt psu
Seagate barracuda 300gig sata2 16megs cache
NEC dual layer dvd burner
Sound blaster xfi

Total comes to about $1945 which I think leaves enough for the monitor.

http://www.tankguys.biz/team-xtreem-cronus-3328-pc4000-infineon-p-1544.html?manufacturers_id=62
 
Tutelary said:
psycho claims his does 3.4, yet puts up a 2.9 shot because "his ram is bad" all of a sudden.




That guy is FOS. Yep, he parades around like a ballet dancer in a pink tutu proclaiming massive overclocks....but when asked for proof, all of a sudden his ram is bad. Go figure. Occam's razor takes over...... :p
 
Chrisman5000 said:
I am not much of an overclocker but I messed with my x2 3800 last night and was not able to get it to 2100mhz without it crashing.

Haha



I am going to have to say, the cpu is not the limiting factor.....ram speeds/settings/timings, ot the mobo not having good options...most likely.
 
psycho getting owned:



bldegle2 said:
Psycho,

Although I have few posts here, I have been clocking for over ten years now and have run into many gems. TEC's, Prommie's, massive air, kinda hit it all in my time.....

However, after extensive research, I have yet to find any AMD core running on stock cooling @3.4 or above.

Even if you did get the 3.4, I can flat out guarantee it is not stable, but you can prove me wrong with proper postings.......8 hours of prime blend would be sufficient, a suicide screen shot doesn't qualify with outrageous claims like yours.....

And, if you have crappy ram right now, you can still get a total clockage shot with a ram divider, so your claims as far as I am concerned are bogus......

If you are trying to inflame people with your postage, you doing a good job, but still haven't 'proven' anything............

whatever,

baldy
 
I have a 4400 foxxcon mobo 6150, I dont want to play with the voltage but I do want a decent overclock. If I just play wtih the memory and clock speed, what could I reasonbli expect? Thanks
 
Cpt Twitchy

wow how did u manage to get 2x7900GT on that budget? I've been calculating for a while now and I can only get 1x 7900GT

The parts I found

AMD Athlon 64 X2 4400+ 2.2GHz Dual Core Socket 939 1MB L2 Cache
BFG GeForce 7900 GT OC 256MB GDDR3 2 Dual-Link DVI-I, HDTV-Out SLI Ready PCI-Express x16 Graphics Card
Western Digital Caviar 250GB SATAII (WD2500KS) 7200RPM 16MB Buffer
OCZ PC-3200 DDR400 Platinum Edition 2GB(2X1024MB) Dual Channel (OCZ4002048ELDCPE-K)
Asus A8N32-SLI Deluxe Socket 939 nVidia NForce4 True Dual X16 SLI 8-Ch Audio Serial ATA Raid, IEEE, Dual GB Lan
OCZ (OCZ520ADJSLI) PowerStream 520 Watt Power Supply Adjustable SLI Ready, Universal Connector with BTX and SATA, Ultra Quiet


RAM i already brought so there's not much to change about them
400MHz DDR
CL 2-3-2-5 (CAS-TRCD-TRP-TRAS)
Unbuffered
Mirrored Platinum Copper Heatspreader
Lifetime Warranty
2.6 Volts
184 Pin DIMM
Enhanced Latency Technology
2.8V EVP



no sound card
have not looked at specific cases or dvd burners yet
and dell 20 inch widescreen ~

and that adds up to about my price range
i am going to newegg to check the prices of your parts!

also, if anyone can answer my question of what the difference between X2 and opteron is? for a gamer that's just going to overlock not too too much, but a bit, i'm a beginner so i'll be cautious to start with, does it matter which one I choose?
 
robman_rob said:
Cpt Twitchy

wow how did u manage to get 2x7900GT on that budget? I've been calculating for a while now and I can only get 1x 7900GT

The parts I found

AMD Athlon 64 X2 4400+ 2.2GHz Dual Core Socket 939 1MB L2 Cache
BFG GeForce 7900 GT OC 256MB GDDR3 2 Dual-Link DVI-I, HDTV-Out SLI Ready PCI-Express x16 Graphics Card
Western Digital Caviar 250GB SATAII (WD2500KS) 7200RPM 16MB Buffer
OCZ PC-3200 DDR400 Platinum Edition 2GB(2X1024MB) Dual Channel (OCZ4002048ELDCPE-K)
Asus A8N32-SLI Deluxe Socket 939 nVidia NForce4 True Dual X16 SLI 8-Ch Audio Serial ATA Raid, IEEE, Dual GB Lan
OCZ (OCZ520ADJSLI) PowerStream 520 Watt Power Supply Adjustable SLI Ready, Universal Connector with BTX and SATA, Ultra Quiet


RAM i already brought so there's not much to change about them
400MHz DDR
CL 2-3-2-5 (CAS-TRCD-TRP-TRAS)
Unbuffered
Mirrored Platinum Copper Heatspreader
Lifetime Warranty
2.6 Volts
184 Pin DIMM
Enhanced Latency Technology
2.8V EVP



no sound card
have not looked at specific cases or dvd burners yet
and dell 20 inch widescreen ~

and that adds up to about my price range
i am going to newegg to check the prices of your parts!

also, if anyone can answer my question of what the difference between X2 and opteron is? for a gamer that's just going to overlock not too too much, but a bit, i'm a beginner so i'll be cautious to start with, does it matter which one I choose?
opteron dc and x2's are the same only opterons only come with 2x1mb cache, the opteron was designed for servers and tend to clock better than x2's, but there really is no difference in the design of the chip, just a different name. stick with the 165 as you can get one for 275 shipped and most if not all overclock to at least 2.6
 
These prices are fof the top of my head as I cleared my wish list at newegg. The prices should be pretty close though.

Lian Li PC 7 B $85
A64 X2 4200+ $350
Team Group pc4000 cronus 3-3-2-8 $220 but you have ram
Dfi SLI-D $167
2x7900GT's $630
Seasonic 600watt psu $160
Seagate barracuda 300gig sata2 16megs cache $135
NEC dual layer dvd burner $40
Sound blaster xfi $100

Total comes to about $1945 which I think leaves enough for the monitor.

http://www.tankguys.biz/team-xtreem...facturers_id=62

EDIT LAtely OCZ psu's havent been up to par with the older ones and the 4400+ is unnecessary as a 4200+ will oc enough to make up the cache difference. I also did 2x evga cards which are nice for the step up and xfx is good as well. I chose them as they have good prices down near $300.
 
Back
Top