• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

where to put pump??

A

alex paik

Limp Gawd
Joined
Jul 2, 2005
Messages
392
well, i have a tiny problem.. i have almost everything put in.. but now its crowded like a mofo in my case and i have no where to put my pump.. can anyone think of anything?

and i think my case is too small because i think anywhere i put tubing, it's going to kink.. anyone have an a8n watercooled?

DSC00186.jpg

DSC00187.jpg

DSC00188.jpg


btw, i will also have a maze4 low pro gpu block.. add that into the mix.. thanks!


edit - i do have two single 120 rads.. does the d5 have to be mounted right side up?
 
hmm, i thought someone might say that.. i forgot to mention that i have a ocz powerstream 600.. so the end of the psu butts up right to the drive cage..
 
Mount it to the top of the case using some black button head socket cap screws. Or another place is right in front of the radiator and the CPU block.
 
id rather not mount it on top of the case.. maybe ill try to mount it in front of the rad..
 
alex paik said:
hmm, i thought someone might say that.. i forgot to mention that i have a ocz powerstream 600.. so the end of the psu butts up right to the drive cage..
Click to expand...
well do you have a pic?
 
Get rid of the D5 and get a DCC? Should fit right nice under your HD or inbetween the rad and HD rack.
 
what about moving the hdd rack? btw the DDC is not a weak pump, but the D5 is still better.
 
i already drilled new holes to move the hdd rack.. i will have two fans on the bottom rad (push/pull).. the fan will butt up to the hdd rack.. i was thinking having the pump facing backward.. how tight can the tubing be before it kinks? i have tygon 1/2 inch..
 
alex paik said:
i already drilled new holes to move the hdd rack.. i will have two fans on the bottom rad (push/pull).. the fan will butt up to the hdd rack.. i was thinking having the pump facing backward.. how tight can the tubing be before it kinks? i have tygon 1/2 inch..
Click to expand...
if it's at least a 3/32" walled tube you should have at least a bend radius of 2-1/4"
 
You must log in or register to reply here.
Back
Top