• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Where to get replacement TJ07 window

D

Dutt1113

[H]ard|Gawd
Joined
Jun 30, 2005
Messages
1,623
I was wondering if anyone knows where to get a replacement acrylic window for a TJ07 sidepanel without paying $30 shipped from them. They quoted me 15 + 15 shipped.
 
I can't answer that. I need one too!
I contacted Silverstone and never got a straight answer -- was told they don't sell them -- then was told I have to buy the entire side. The latest email I got was
"Yes we can sell you the side panels they are $39 each plus shipping the side panels are not guarantee they will fit 100% in your case due to the unibody design"

How did you contact them?
I was going to TAP plastics but I would have to cut it to fit- would rather slap a new one in so your source may be better for me.
 
Last edited:
I called silverstone up and they said a replacement side window is $15 plus $15 ship which is ridiculous for a side window.
 
Use a dremel or a rotozip or even a table saw. Just get an appropriate blade.

And mount it firmly on place and cut it w/ a piece of wood too & you'll get a much cleaner cut.
 
I'd get polycarbonite instead. It doesn't melt when you cut it. I cut mine with a jigsaw. It's also a lot stronger.
 
Dutt1113 said:
I called silverstone up and they said a replacement side window is $15 plus $15 ship which is ridiculous for a side window.
Click to expand...
Amazing, they emailed me (Joel) and said 39.00 plus shipping and it may not fit...!. I'll do the home depot thing.....thanks Dutt1113 for the confirmation on cost!
3-21- 2011 Just talked to them and the cost is now $12 for the window. The price they quoted was for the entire side panel.
 
Last edited:
let me know how you guys go about getting a clean cut on a sheet of acrylic from the hardware store. All I have is a dremel and trying to figure out how to get a clean square cut
 
let me know how you guys go about getting a clean cut on a sheet of acrylic from the hardware store. All I have is a dremel and trying to figure out how to get a clean square cut
Click to expand...

Don't use a dremel on acrylic. It'll melt all over the damn place. Polycarb, as said before will be fine though.

For reference, this is the polycarb I made my TJ07's window out of.
 
As an Amazon Associate, HardForum may earn from qualifying purchases.
I used to see places carry them pre-cut, but since the case has been out for some time now its alot harder to find. Best bet like everyone said is to make your own.
 
What about frozen cpu? I know some of them online shops sell side panels for some cases.
 
You must log in or register to reply here.
Back
Top