My computer has been upgraded over the years replacing every part but now that I am using it for office/school work, I don't have much demand from my computer in processing power but now all the documents and files are cluttering my system and accessing files has been ungodly slow. I have 2 7200RPM HDDs in raid 0 for 1terabyte but space isn't an issue as I just purchased a 4 terabyte Synology NAS.
I wanted to decrease my wait time accessing my HDD but it seems that SSD is the way to go. My motherboard is an ECS-A780GM which is a bit old and is on SATA-1 still so I won't capture the full capability of SATA-3. If I upgrade my motherboard, I have to change my RAM and processor which will be nice big upgrades as well but now for getting a good 128MB SSD for $120, I'm looking at around $500 in upgrades to make everything work. I understand computers like cars need all things upgraded to unlock the true potential but as you know with cars and technology, as soon as you buy it, the worth degrades. I am not strapped for cash but my current system is still good for 95% of the things I do. Only thing is I can't really play any intensive 2012 games but not that I do that stuff.
So when do you decide to buy a new computer or do a major upgrade? If your current computer is not obsolete but no longer cutting edge, would you still upgrade? What do you do with your old PC? (Reselling is worthless IMO)
My motherboard specs below. I'm running a quad-core @ 2.5ghz
º AMD PhenomII / Phenom processor (Socket AM2+)
º AMD Athlon 64 FX / Athlon 64 X2 Dual Core/ Athlon 64 / Sempron processor
º Support 125W Phenom II X6 processors
º High-performance HyperTransport 3.0 CPU Interface
º Support transfer rate up to 5200 mega-transfers per second
º Note: This board supports CPU up to 140W TDP ; you can refer to AMD website to check your CPU.
º AM3 Ready
CHIPSET º AMD® 780G & AMD® SB750
º North Bridge: AMD® 780G
º South Bridge: AMD® SB750
GRAPHICS º On Chip (AMD 780G-based with ATI Radeon HD3200 graphics )
º Integrated DirectX 10 graphics processor
MEMORY º Dual-channel DDR2 memory architecture
º 4 x 240-pin DDR2 DIMM socket support up to 32GB*
º Support DDR2 1066/800/667/533/400 DDR2 SDRAM
º * (Due to the DRAM maximum size is 2GB at present, the memory maximum size we have tested is 8GB)
Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 32-bit OS.
For Windows® 64-bit OS with 64-bit CPU, there is no such limitation
EXPANSION SLOT º 1 x PCI Express x16 slot
º 2 x PCI Express x1 slots
º 3 x PCI slots
STORAGE º Support by AMD SB750
2 x Ultra DMA 100/66/33 devices
6 x Serial ATA 3.0Gb/s devices
RAID0, RAID1, RAID5, RAID 10 configuration
º Support by JMB 361
1 x eSATA 3Gb/s port
AUDIO º Realtek ALC888 8-channel audio CODEC
º Compliant with HD audio specification
LAN º Realtek RTL 8111C Gigabit Fast Ethernet NIC
REAR PANEL I/O º 1 x PS/2 keyboard & PS/2 mouse connectors
º 6 x USB 2.0 ports
º 1 x Gigabit Ethernet Port
º 1 x eSATA 3Gb/s port
º 1 x Audio port (1x Line in, 4x Line out, 1x Optical SPDIF Out)
º 1 x VGA port
º 1 x HDMI Port
INTERNAL I/O CONNECTORS & HEADERS º 1 x 24-pin ATX Power Supply Connector & 8-pin 12V Connector
º 1 x 4-pin 12V Connector
º 1 x CPU_FAN connector
º 1 x PWR_FAN connector
º 1 x SYS Fan header
º 1 x FDD connector
º 1 x IDE connector
º 6 x Serial ATA 3Gb/s connectors
º 1 x Speaker header
º 1 x Front panel switch/LED header
º 1 x Front panel audio header
º 3 x USB 2.0 headers support additional 6 USB ports
º 1 x RESET button & 1 x POWER ON button
SYSTEM BIOS º AMI BIOS with 8Mb SPI Flash ROM
º Supports Plug and Play, STR/STD, Hardware monitor, Multi Boot, DMI,HDCP
º Supports ACPI revision 3.0 specification
º Support over-clocking
º ECS M.I.B. utility
FORM FACTOR º ATX Size, 305mm*244mm
I wanted to decrease my wait time accessing my HDD but it seems that SSD is the way to go. My motherboard is an ECS-A780GM which is a bit old and is on SATA-1 still so I won't capture the full capability of SATA-3. If I upgrade my motherboard, I have to change my RAM and processor which will be nice big upgrades as well but now for getting a good 128MB SSD for $120, I'm looking at around $500 in upgrades to make everything work. I understand computers like cars need all things upgraded to unlock the true potential but as you know with cars and technology, as soon as you buy it, the worth degrades. I am not strapped for cash but my current system is still good for 95% of the things I do. Only thing is I can't really play any intensive 2012 games but not that I do that stuff.
So when do you decide to buy a new computer or do a major upgrade? If your current computer is not obsolete but no longer cutting edge, would you still upgrade? What do you do with your old PC? (Reselling is worthless IMO)
My motherboard specs below. I'm running a quad-core @ 2.5ghz
º AMD PhenomII / Phenom processor (Socket AM2+)
º AMD Athlon 64 FX / Athlon 64 X2 Dual Core/ Athlon 64 / Sempron processor
º Support 125W Phenom II X6 processors
º High-performance HyperTransport 3.0 CPU Interface
º Support transfer rate up to 5200 mega-transfers per second
º Note: This board supports CPU up to 140W TDP ; you can refer to AMD website to check your CPU.
º AM3 Ready
CHIPSET º AMD® 780G & AMD® SB750
º North Bridge: AMD® 780G
º South Bridge: AMD® SB750
GRAPHICS º On Chip (AMD 780G-based with ATI Radeon HD3200 graphics )
º Integrated DirectX 10 graphics processor
MEMORY º Dual-channel DDR2 memory architecture
º 4 x 240-pin DDR2 DIMM socket support up to 32GB*
º Support DDR2 1066/800/667/533/400 DDR2 SDRAM
º * (Due to the DRAM maximum size is 2GB at present, the memory maximum size we have tested is 8GB)
Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 32-bit OS.
For Windows® 64-bit OS with 64-bit CPU, there is no such limitation
EXPANSION SLOT º 1 x PCI Express x16 slot
º 2 x PCI Express x1 slots
º 3 x PCI slots
STORAGE º Support by AMD SB750
2 x Ultra DMA 100/66/33 devices
6 x Serial ATA 3.0Gb/s devices
RAID0, RAID1, RAID5, RAID 10 configuration
º Support by JMB 361
1 x eSATA 3Gb/s port
AUDIO º Realtek ALC888 8-channel audio CODEC
º Compliant with HD audio specification
LAN º Realtek RTL 8111C Gigabit Fast Ethernet NIC
REAR PANEL I/O º 1 x PS/2 keyboard & PS/2 mouse connectors
º 6 x USB 2.0 ports
º 1 x Gigabit Ethernet Port
º 1 x eSATA 3Gb/s port
º 1 x Audio port (1x Line in, 4x Line out, 1x Optical SPDIF Out)
º 1 x VGA port
º 1 x HDMI Port
INTERNAL I/O CONNECTORS & HEADERS º 1 x 24-pin ATX Power Supply Connector & 8-pin 12V Connector
º 1 x 4-pin 12V Connector
º 1 x CPU_FAN connector
º 1 x PWR_FAN connector
º 1 x SYS Fan header
º 1 x FDD connector
º 1 x IDE connector
º 6 x Serial ATA 3Gb/s connectors
º 1 x Speaker header
º 1 x Front panel switch/LED header
º 1 x Front panel audio header
º 3 x USB 2.0 headers support additional 6 USB ports
º 1 x RESET button & 1 x POWER ON button
SYSTEM BIOS º AMI BIOS with 8Mb SPI Flash ROM
º Supports Plug and Play, STR/STD, Hardware monitor, Multi Boot, DMI,HDCP
º Supports ACPI revision 3.0 specification
º Support over-clocking
º ECS M.I.B. utility
FORM FACTOR º ATX Size, 305mm*244mm