When are the native 4k drives coming?

housecat

Gawd
2FA
Joined
Jan 26, 2005
Messages
780
Anyone have any info on this? So far, I don't know of any native 4k drives, just 512e. Personally I've avoiding 512e drives in favor of either native 512 or native 4k. Holding out for the native 4ks though, whenever those are going to be released.
 
When Windows XP fases out. As i understand its the whole reason for this messy emulation firmware; they wanted XP compatibility.
 
That pretty much leaves Hitachi as the only choice then. All their drives are true 512. WD and Samsung for large storage drives have started moving to 512e. Eventually some vendor will start providing both firmwares to users, I hope.
 
The Seagate Barracuda 3TB has 4K bytes sectors: 732,564,000 sectors x 4096 = 3,000,582,144,000 bytes.

Weirdly, it's only released as an external drive, exact same price as the 2TB XT, so it's probably a matter of weeks before we see an internal version, and at other manufacturers too.
I read that Seagate planned to introduce this capacity in its enterprise range first, that may explain the delay, but I haven't seen any confirmation.
 
The EARS jumper changes an offset to help with alignment under XP/Linux.. it doesn't change how it reports to the OS. There's no way to get any of the 512e drives to report as 4k, and this can cause performance issues in some cases.

People have been asking for a different firmware for a while now but AFAIK nothing has changed.
http://community.wdc.com/t5/Other-I...tor-emulated-firmware-for-WD-EARS/idi-p/21347
Essentially if you want a native 4k drive you will have to wait until someone decides to sell us one.

For now, the Hitachi 7K1000.C series is the most reliable, 512byte drive out there.
 
Well at least with my 2TB EARS I was able to force fdisk to properly align my 4 partitions. Although I completely forgot how I did that. Today I noticed fisk supports a sector size parameter so I will try that when I partition my 2 F4s..
 
Setting the sector size to 4096 appeared to work up until I put the disk in the lvm and it ended up being 1/8 its size.. :(


Edit: I use gdisk instead and all is well. I used the experts menu to set the boundaries to 8 sectors. Then I created 2 partitions.


Command (? for help): p
Disk /dev/sdg: 3907029168 sectors, 1.8 TiB
Logical sector size: 512 bytes
Disk identifier (GUID): FE59FA64-9203-49A8-AE0C-B6DDC0D439D4
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 3907029134
Partitions will be aligned on 8-sector boundaries
Total free space is 6 sectors (3.0 KiB)

Number Start (sector) End (sector) Size Code Name
1 40 104857639 50.0 GiB 0700 Linux/Windows data
2 104857640 3907029134 1.8 TiB 8E00 Linux LVM

Although I could have just accepted the default gdisk-0.6.9 alignment of 2048 sectors.
 
Last edited:
Back
Top