What's good for CRTs?

Fryguy8

[H]ard|Gawd
Joined
Sep 26, 2001
Messages
1,707
I'm looking for a new pair of CRTs (started out with a KDS 19", picked up some random CTX 17" that's starting to die), and I want to go big.

First though was a pair of 2001fps, but I have PLENTY of room for CRTs, so the LCD space saving isn't an issue. Also CRTs are (generally) still cheaper than LCDs, and I will be doing some gaming at lower resolutions. Enough reasons for me to stick with CRT.

I do want at least 21s though. Need to be able to do at least 1600x1200 all day long, preferably a higher resolution (yes, I can use 3200x1200 without a problem). Obviously I want a sharp image, good colors etc.

Primary purpose is for everyday desktop tasks, and programming. I can have A LOT of stuff up simultaneously when programming, and it's nice to be able to see it all at once, so the higher the resolution, the better.

For 21s, how hard is it to drive them harder than the "standard" 1600x1200 that they recommend? Most list a recommended of 1600x1200 and a max of 2048xwhatever. If I could run them in between that that'd be fine.

Any particular suggestions?

http://www.newegg.com/app/ViewProductDesc.asp?description=24-116-234&depa=0

I was looking at this, but the only thing that attracted me to it was the recommended resolution being so high.
 
I agree. There's nothing wrong with going higher as long as it's in spec....That'll pull 1600 x 1200 100+Hz, and 2048 x 1536 at 85Hz. The max rez is too small for working with apps, but it's fine for games.
 
Well, I don't have a problem with 1600x1200 on a 19" screen, so I'm assuming I'll be able to crank it at least a bit higher on the 21"

Thanks for the recommendation, I've got an NEC in the other room that I've always loved, and have never had an issue with NEC monitors, so I'll give it some serious thought.
 
Craftish said:
Your search has ended: NEC FP2141SB.

What makes this monitor better/different than like the FE2111sb. Your model doesn't seem to be listed on newegg. Just curious.
 
I think it is being phased out, but it's still available for now. It appears the $1200 professionally-oriented Spectraview version will continue to be offered.

The 2141 is basically the same as the 2111, but a little more capable. The 2111 has the same recommended rez of 1600 x 1200 at 85Hz, but the refresh for 1600 x 1200 maxes out at 91Hz, and its max rez is 1920 x 1440 at 76Hz. The 2141 goes up to 109Hz at 1600 x 1200, and 2048 x 1536 at 85Hz. It also has a 5 port USB hub built in.

You can find the Mitsubishi version at Dell, which is the same monitor. Its called the 2070SB.
 
Mitsubishi Diamondtron 930sb. Make sure whatever monitor you get is Aperture Grille if you care about having a truly accurate screen shape and accurate color.
 
For a new screen, get a 22" NEC or order the "house brand" 22" aperture grill model from Dell, IBM, etc. (they're all NECs these days)

Personally I'd go used. It's a lot cheaper and there are tons of nice used off lease 21-22" monitors available. Mostly they're rebadged Sony Trinitrons. Depending on age and capability, they seem to be about $100 for an older model to $300 for a relatively new NEC. Used NECs are actually more expensive than Sonys. Some might argue that they're better, but personally I can't see a significant difference in quality between Sony, NEC, and Hitachi (having used all three) so I think perhaps the NECs just cost more due the used market being flooded with Sonys while NECs are rather scarce.

If you feel like spending the bucks and can handle a 92.6 lb monitor, a 24" Sony GDM-FW900 widescreen (probably again rebadged one sold by HP, Sun, or SGI) is another nice option. I got one for $478 shipped from acenh on eBay. Nothing like HL2 in 2304x1440. :)
 
I think i'm definetely going to go with these IBMs. It's hard to beat that price, and it'll almost surely be better than my non-aperture 19" kds that I've got now.

Hopefully my desk can support a pair of 21s :)
 
Fryguy8 said:
it'll almost surely be better than my non-aperture 19" kds that I've got now.
Nothing wrong with Shadow Masks... you just have to get good ones. The catch is good ones aren't made anymore. I've got a Hitachi 21" shadow mask screen that's sharper than any Sony or NEC I've used and really is flat.
Now Sony vs. KDS on the other hand... that's a whole different story.
 
Back
Top