what should i do?

port-error

Weaksauce
Joined
Sep 19, 2003
Messages
74
I'm so confused as to what I should do. I currently own an a7n8x-dlx board w/ 2800+ processor. About 2 months ago, I had a surge to my computer, and it ended up frying my cdrw, hardrive, and powersupply. After replacing the hardrive and power supply, my computer was perfect. But, i started noticing little problems. First, the motherboard case temperature reads 150C, in bios and in motherboard monitor. Obviously its not that temp inside my case. The CPU reads at a good low temperature though. Secondly, the new ATI drivers for my 9800 pro card don't seem to be installing correctly, because I can't get to an advanced option for my video card settings menu.

I've been debating if i should just buy a new board all together. (looking at DFI Lanparty and A7n8x-dlx). Or should i just stick it out with this board?
 
ok, do a clear on the bios via cmos switch on board - see if that cures what ails ya. if not do what I call a deep clear - switch cmos to clear and remove battery for 30 minutes... see if that helps - load in a new bios may be helpful
make absolutely sure you have quality surge protection/ups - APC is what I recommend... this ensures you are not still being effected by poor power - (have your electricity checked by a professional as you may have poor electrical wiring in your home - a fire hazard...)
As for the video card situation go- to ati's website and download their driver remover - remove & reload your vid card drivers as well as direct X.
See if these things help - good luck
 
Back
Top