What is Wrong With My Q6600?

Airjarhead

n00b
Joined
Mar 11, 2007
Messages
40
Hey guys,
I got a Q6600 from Fry's on BF and replaced my E4300. Since I really don't have a lot of time to mess with it, I just figured I'd go for a modest overclock of 3GHz. However, I can't get it to to through more than an hour of Prime 95 for more than an hour without one of the cores failing. Also, I find it a little weird that the temp difference between the 1st core and the 4th core is 6-7 degrees C. This is what I've tried:

-I tried going to 400x8 and Vcore of 1.35 and it wouldn't boot!
-I tried 350x9 and got blue screens before an hour was up.
-Stock volts at 333x9 (Mem at 1:1) and core 0 failed just before an hour, the rest went 6 hours without error (I had left it over night).
-I upped the Vcore to 1.3125 and core 2 failed after an hour.
-I upped the volts to 1.35 and core 1 failed at 40 mins.

I'm using Everest for Temps (because of the coretemp issue with Vista x64), and none of the cores go over 60 degrees.

I've run memtest all night a few times at different settings and have never had any errors.

What do you think it is?

Thanks,
 
What error in Prime? if it's a rounding error, more times than not it's not enough voltage to your cpu.
 
Thanks for the quick reply. It was a rounding error every time. I was also wondering If I should just let the test run on blend with the default 1750MB of mem, or use another value since I have 4GB of Ram. Actually, now that I think about it the one time it blue-screened while running Prime it said it was a pagefile access error because I set Prime at 3200MB.
 
What MB are you using. I know that the GA-965P ver. 1 boards max out at around 3.0ghz with a Q6600 but will go above 3.6ghz with a dual core.
 
As I understand it the P5W-DH is a lousy quad core overclocker. I can't say for sure as I don't own a P5W DH any longer and I've never run a Q6600 on one.
 
As I understand it the P5W-DH is a lousy quad core overclocker. I can't say for sure as I don't own a P5W DH any longer and I've never run a Q6600 on one.

Well if that's the case, I'm really pissed that I canceled the Abit IP-35 Pro I ordered from Newegg on Cyber-Monday. I was starting to feel guilty for all of the new crap I had bought, and my wife was pissed so I canceled it.
Anyway, I did run it last night at stock settings on the CPU, and the memory at 667 3-4-4-8. It went 13 hours with no errors. So it's definitely not the memory right?
 
Back
Top