What brand of RAM was used with my 9800SE?

[TruGeek]

I am interested in putting one of these on my 9800SE:

http://softmod.ocfaq.com/bios.php

but I don't know what brand of RAM was used, thus which BIOS to use with the card. I have an ATI (built) Radion 9800SE with TSOP memory, 4 pipes, 128bit (). I can post any of the serial numbers or other information off the card if it is needed. Thanks for any help!

 

[CleanSlate]

whoops

~Adam

 

[BillLeeLee]

TSOP's not a brand, it's a connector type. Thin Small Outline Packaging (?)

If you look at the vid card RAM chips they should say the manufacturer. However, if you have Radlinker (the overclocking program), it can tell you the RAM chip maker.

 

[TruGeek]

I have heatsinks on the RAM but I did take one off and there wasn't any brand printed on the RAM. I'll give the Radlinker program a shot though. Thanks.

 

[Nexx]

Originally posted by TruGeek
I am interested in putting one of these on my 9800SE:

http://softmod.ocfaq.com/bios.php

but I don't know what brand of RAM was used, thus which BIOS to use with the card. I have an ATI (built) Radion 9800SE with TSOP memory, 4 pipes, 128bit (). I can post any of the serial numbers or other information off the card if it is needed. Thanks for any help!

unless your gonna do the hardware mod, moving a resistor, there is no point in flashing your bios. the softmod is all you need.

 

[TruGeek]

Do you mean this:

http://www.ocfaq.com/article.php/overclocking/vidcard/56

They don't have my specific card listed but I can see if I can figure that layout out in respect to my specific card. Why does this matter as far as the BIOS is concerned? I could do this mod, just wondering why it wasn't mentioned on the BIOS page (not that much is explained on that site).