What are you mining right now?

M

mnewxcv

[H]F Junkie
Joined
Mar 4, 2007
Messages
8,994
Seems like a good idea for a thread where we can periodically chime in with what algos we are working on. For me right now, daggerpascal for my 10 series cards, equihash for my 9 series cards, both via nicehash.
 
GRLC difficulty dropped way down overnight, So mining that right now, but am going to switch over to nicehash/equihash shortly
 
  • Like
Reactions: Parja
like this
mine.gif
 
1060's are on Daggerhash, 1080 likes equihash on Nicehash.

Because Im a noob, I was planning to let them stay on nicehash for a month or two before trying elsewhere. The falling payouts are prompting me to move sooner.
 
urbsnspices said:
1060's are on Daggerhash, 1080 likes equihash on Nicehash.

Because Im a noob, I was planning to let them stay on nicehash for a month or two before trying elsewhere. The falling payouts are prompting me to move sooner.
Click to expand...

I am suspicious they are skimming a little here and there. People are moving to other pools.
 
if cashing out regularly -- nicehash is still, perhaps surprisingly, more profitable than mining the typical mainstream coins direct - even with the profits falling.

whattomine.com

put in a 3 day or 7 day average...
 
Orddie said:
Zcash.
Click to expand...


ZCash..

I havnt gotten a dime back from NH.. dont expect to at this point.. I switched to Zcash when NH went down.. and have bounced around a few pools.. I found Miningpoolhub works best for me, and I have my payouts to my wallet set once a week..
 
Dual Eth + Pascal on the 1070s, Equihash on the 1070 Ti's.
 
KedsDead said:
ZCash..

I havnt gotten a dime back from NH.. dont expect to at this point.. I switched to Zcash when NH went down.. and have bounced around a few pools.. I found Miningpoolhub works best for me, and I have my payouts to my wallet set once a week..
Click to expand...

i think flypool is a bit better. getting about 0.01 very 3.8-4.7 hours. just wish the has would not swig so bad
 
I am mining...a troublesome booger. It's ok, nobody can see me, I'm not gonna eat it, and I would seriously doubt that what I'm doing will influence the insane costs of GPUs. Ever.
 
Got my 1080ti on nh and my 2 threadrippers doing etn.

Thinking about pulling one system off NH to do RVN
 
Electroneum.

I have 1 rx 56 going and getting another today.

Should be pulling in around 90-100 coins a day.
 
abunch of Electroneum on my intel phi servers

zcash on my firepro rigs.
 
Still bouncing between ETN and Graft on my Vegas. I just picked up a pair of XFX 580 GTR BLKs and am trying to decide what to put then on when I'm not gaming. Thinking of sticking with ETH on them for now.
 
If you havn't checked out Claymore's Neoscript miner for AMD, its a must have.
Paglinpav's hsrminer_neoscrypt might be the current best for NVIDIA.
I been mining Neoscrypt, mostly at altminer.net, but the site suddenly shut down.
Got paid all my coins I was mining, so no worry there. But I needed a new pool.

Tried Zergpool, which at first seemed OK, aside from having a high threshold for
payouts. But something seems wrong with autotrade. Even when I specify mc=
it mines something else and charges me to trade for the neoscrypt coin I wanted.
I was like damn, if its going to charge for autotrade wether I want it or not, might
just as well get paid in LTC. And I did that for a while, but its just bleeding money
from some inefficiency or other. Maybe mines the coin while its hot, then trades
it when it cold, after confirmations? Not sure I even care, I'm just done with them.
0% fee is baloney, they get you on the autotrade...

ETN mining has been all for naught, as Cryptopia's wallet is broke I got no way
to trade ETN for BTC, ETH, LTC, or cash. ETN GUI wallet hacked from Sumo
also seems broke. But I suspect I just need to rebuild my copy of the blockchain.
There was a hard fork a week or so back, something about a stuck block.
I'm probably walleting off an obsolete daemon, looking at an obsolete chain.
Which is maybe why my recent ETN sends havn't appeared on the exchange.
Hope the new ElectroniumD might reveal that I still have those coins.

Really, I need to get back into XMR, as I'm concerned ETN difficulty will rise
with the new ASICs. Monero announced changes to its algo to remain ASIC
proof. Cryptonight v7 or something. Need to choose an updated miner and
wallet before the hardfork block. Countdown http://xmr.noctism.com/
Just checked, still some 6000 blocks to go as I am typing. March 28???

Back to mining ETH, and XMR on nanopool, exactly where I started...
 
Last edited:
KD5ZXG said:
If you havn't checked out Claymore's Neoscript miner for AMD, its a must have.
Paglinpav's hsrminer_neoscrypt might be the current best for NVIDIA.
I been mining Neoscrypt, mostly at altminer.net, but the site suddenly shut down.
Got paid all my coins I was mining, so no worry there. But I needed a new pool.

Tried Zergpool, which at first seemed OK, aside from having a high threshold for
payouts. But something seems wrong with autotrade. Even when I specify mc=
it mines something else and charges me to trade for the neoscrypt coin I wanted.
I was like damn, if its going to charge for autotrade wether I want it or not, might
just as well get paid in LTC. And I did that for a while, but its just bleeding money
from some inefficiency or other. Maybe mines the coin while its hot, then trades
it when it cold, after confirmations? Not sure I even care, I'm just done with them.
0% fee is baloney, they get you on the autotrade...

ETN mining has been all for naught, as Cryptopia's wallet is broke I got no way
to trade ETN for BTC, ETH, LTC, or cash. ETN GUI wallet hacked from Sumo
also seems broke. But I suspect I just need to rebuild my copy of the blockchain.
There was a hard fork a week or so back, something about a stuck block.
I'm probably walleting off an obsolete daemon, looking at an obsolete chain.
Which is maybe why my recent ETN sends havn't appeared on the exchange.
Hope the new ElectroniumD might reveal that I still have those coins.

Really, I need to get back into XMR, as I'm concerned ETN difficulty will rise
with the new ASICs. Monero announced changes to its algo to remain ASIC
proof. Cryptonight v7 or something. Need to choose an updated miner and
wallet before the hardfork block. Countdown http://xmr.noctism.com/
Just checked, still some 6000 blocks to go as I am typing. March 28???

Back to mining ETH, and XMR on nanopool, exactly where I started...
Click to expand...

Dump your ETN on Kucoin... that's what I did with cryptopia being all fubar.
 
KD5ZXG said:
If you havn't checked out Claymore's Neoscript miner for AMD, its a must have.
Paglinpav's hsrminer_neoscrypt might be the current best for NVIDIA.
I been mining Neoscrypt, mostly at altminer.net, but the site suddenly shut down.
Got paid all my coins I was mining, so no worry there. But I needed a new pool.

Tried Zergpool, which at first seemed OK, aside from having a high threshold for
payouts. But something seems wrong with autotrade. Even when I specify mc=
it mines something else and charges me to trade for the neoscrypt coin I wanted.
I was like damn, if its going to charge for autotrade wether I want it or not, might
just as well get paid in LTC. And I did that for a while, but its just bleeding money
from some inefficiency or other. Maybe mines the coin while its hot, then trades
it when it cold, after confirmations? Not sure I even care, I'm just done with them.
0% fee is baloney, they get you on the autotrade...

ETN mining has been all for naught, as Cryptopia's wallet is broke I got no way
to trade ETN for BTC, ETH, LTC, or cash. ETN GUI wallet hacked from Sumo
also seems broke. But I suspect I just need to rebuild my copy of the blockchain.
There was a hard fork a week or so back, something about a stuck block.
I'm probably walleting off an obsolete daemon, looking at an obsolete chain.
Which is maybe why my recent ETN sends havn't appeared on the exchange.
Hope the new ElectroniumD might reveal that I still have those coins.

Really, I need to get back into XMR, as I'm concerned ETN difficulty will rise
with the new ASICs. Monero announced changes to its algo to remain ASIC
proof. Cryptonight v7 or something. Need to choose an updated miner and
wallet before the hardfork block. Countdown http://xmr.noctism.com/
Just checked, still some 6000 blocks to go as I am typing. March 28???

Back to mining ETH, and XMR on nanopool, exactly where I started...
Click to expand...

I thought ETN used XMR's codebase. Wouldn't it be ASIC proof, too?

I'm still a noob to crypto.
 
ETN is based on XMR but the issue is how fast they can apply the changes and how competent their Dev team? With their recent blunders that required an outsider to fix their network issue.
 
What dev team? No % in ASIC proofing for ETN devs either way, if any still live.
Cryptonight V7 is not happening for this coin anytime soon.
 
You must log in or register to reply here.
Back
Top