What A Nightmare!!

Island

Gawd
Joined
Sep 28, 2005
Messages
887
Damn fellas...If it wasn't for shear determination I woulda smashed my new mbo and vidcard yesterday....Here's the deal...Bought from the egg a new asus a8n5x to compliment my new BFG 7900GTX and my happy switch to PCI-E...or so I thought :mad:

Got my stuff from UPS around 10AM and for the love of GOD, by 1AM I was about to kill some1....Anyway, long story short....The dev R&D and Q\a sucks because they shoulda known the issues with some mobos and these cards...I took my old a8v out, swapped everything back with my new a8n5x, buttoned it up, and went to seat the card...and wtf?? It ain't going in...Crap...Of course I try again and felt like just mashing it in, but after a few deep breaths I surveyed, and looky here...

The chipset fan Asus uses is a nice big fat bastard, not to mention, BFG uses like 5 feet of plastic to enclose the hsink...Well, after taking out the mobo again, and crying, and calling BFG and Asus tech support...Needless to say they were both useless in giving any helpful info(asus tech blames BFG product -BFG tech, said, "huh, what mobo?"...Sooo, Was just about to RMA my crap back when a light went off...

DING!..I popped that damn fan off of the asus mobo, and took my nice SMALL/THIN hsink off of my old a8v, and after another hour of swapping, I crossed my fingers, and poof...puter wouldn't start :mad: heh-oh well, I finally figured it out, as the ddr voltage was to low to boot the comp, but now, even though the chipset hsink mod is hot ass FU** to touch, my comp she's a purring and XP reinstalled w\o a hitch...Just FYI fellas for those with these types of mobo setups-L8 BRING ON OBLIVION!
 
Man your rant got me worried about your hardware. I was getting scared for some reason... too much time around computers :(
 
heh-srry for the rant, I was just sooo upset yesterday after spending all weekend getting ready and excited..It was a black Monday to say the least-But, everythings up and running, but damn lol, I still haven't had any time yet to install any games to try out this new setup for the main reason I purchased it...heh.. i did download Aquamark3 though and fired her up and scored a little over 86000 which brought a smile and a tear to my eye...My poor 6800gt would barely get me to 68000 with my FX55 so ya, i'm happy!
 
Pkirk618 said:
u gonna cool that chipset another way?

Well, good question...This nvidia southbridge gets damn hot, but wth am I gonna do? Even with this mod with the A8v hsink swap, there still probably only less then a pencil width between the chipset hsink, and the shroud from the vid card....

It really is a tight fit..I was gonna just rma, and get another mobo but U know how it is..shipping out, and waiting, and reinstalling...ahh screw that...It's working good so far...I am worried though about the time summer rolls around out here in Cali, and possibly Fubaring the chipset due to the heat..U got any ideas??- thought about zip tying the fan somehow but I dunno if that would even work
 
What about one of those laptop CPU coolers? The ones with the offset heatsink connected to heatpipes? That could work. Don't some desktop motherboards have chipset coolers like that too?
 
Monitor your chipset temperatures in Windows... as long as you're below 60 C under extended load, it won't cook or anything. If you can, rig a fan up to blow across the heatsink, you should be fine. Congrats on the killer rig :)
 
Someone needs some anger management classes if you get that upset over computer gear.

Anyway, I'm glad you got it figured out. :p
 
well, after posting this thread, I took a look at the fan chipset fan that i had to take off, and was like duh...All i had to do was take out 8 little screw and the fan housing came apart..Now I have the little fan seperated, and it might barely fit, atleast half way on top of the hsink, but #1 the base of the fan is these plastic feet, which I hope would not melt with the high heat dissipation, and #2, how would I even mount it on top of the hsink?...High temp glue? or high temp tape perhaps....I dunno, gonna google a bit
 
Zinn said:
Monitor your chipset temperatures in Windows... as long as you're below 60 C under extended load, it won't cook or anything. If you can, rig a fan up to blow across the heatsink, you should be fine. Congrats on the killer rig :)


Thanks for the reply...Don't think this mobo supports a chipset temp sensor..atleast my asus probe II doesn't have a tab for it...only for the fan rpm...I been using the poor mans sensor...sticking my fingernail on top of the hsink and waiting to see if I feel an unpleasant burning dissipating into my finger..Other then that, i'm up for suggestions :)



AppaYipYip said:
Someone needs some anger management classes if you get that upset over computer gear.

Anyway, I'm glad you got it figured out. :p


Dude- I worked on the thing for over 10 hours....I had to take the mobo out after my initial install, and that was after tidying all the wires with zip ties, and cleaning it all up...Mind you I do have patience, but cmon' gimme a break....
 
Island said:
Thanks for the reply...Don't think this mobo supports a chipset temp sensor..atleast my asus probe II doesn't have a tab for it...only for the fan rpm...I been using the poor mans sensor...sticking my fingernail on top of the hsink and waiting to see if I feel an unpleasant burning dissipating into my finger..Other then that, i'm up for suggestions :)






Dude- I worked on the thing for over 10 hours....I had to take the mobo out after my initial install, and that was after tidying all the wires with zip ties, and cleaning it all up...Mind you I do have patience, but cmon' gimme a break....

Good for you for finding how to make it work, lets just hope your motherboard doesn't fry because of temperature problems now . :eek:
 
And here's how I ended up fixing this whole nightmare...Used my heatsink from my old A8v mobo, and took apart the bulky housing on the new chipset fan, and was able to screw into the one of the fins on the heatsink...Don't look half bad, and no more worries ;)

 
Island said:
And here's how I ended up fixing this whole nightmare...Used my heatsink from my old A8v mobo, and took apart the bulky housing on the new chipset fan, and was able to screw into the one of the fins on the heatsink...Don't look half bad, and no more worries ;)


Good.
 
Shoulda splurged and got a DFI expert board. They even make waterblocks that fit between the cards, that is if you have your cards cooled with water also, otherwise forget it. Either way there is plenty of room for the cards not hitting the fans. I read that the chipset on these boards can run safely at 90C if that makes you feel better. I ran mine without a fan accidently for a day or two and had no problems except it started to smell not so good. Glad you got her working, sometimes the ride is rough, but that just makes it more worth it when you get her going.
 
That's not rage... My roomate in my last year of highschool (yay, boarding) shot the LCD of his school issued laptop because it was painfully slow. 248mb of ram for Xp (integrated video...)? Are you kidding me? It was terrible.

When I say shot... I mean shot... He pwn3d the thing, point-blank, with about 50 rounds of an airsoft uzzi... Needless to say, the computer didn't live. Yay for insurance coverage... I guess :eek:
 
I wonder, and I haven't looked but don't they make/sell heatsinks thin with pipes extending to another point on the motherboard where it's cooled? Like those ASUS boards work,
 
I think the above happened w/ Anna Nicole Smith and her late husband, when she said "Honey, is it in?"
 
Back
Top