Western Digital HDD Diagnostics program? check for counterfeit drives?

AMD_Gamer

Fully [H]
Joined
Jan 20, 2002
Messages
18,287
I have several drives coming in this week from Ebay and wanting to make sure they are not counterfeit drives. I came across this article where somebody used the Seagate diagnostics tools that can tell if all the firmware is what it is supposed to be etc. Is there something similar for Western Digital Drives? http://reviews.ebay.com.au/Is-your-hard-disk-drive-genuine-or-counterfeit_W0QQugidZ10000000005277073

Also, what software should I use to test them out to make sure everything is good with them? I usually just do a full format.
 
Last edited:
The smart data will be the same no matter what program you use to display it. CrystalDiskInfo is just one of the better looking displays of this on windows.
 
SO I would assume that these counterfeit drives are older or smaller sized than what you think they are?
All warranties aside..
 
I am not sure any tool will tell you the drive was refurbished. I believe the only thing you can do with software (SMART data will tell you this) is match the serial number and model number to the label. Although the manufacturer should know what drives were refurbished for warranty purposes but I do not believe that information is recorded on the drive.

Edit: Unlike the Seagate example I would expect that if some one spent the time to remove the label that they would get the serial number correct.
 
Last edited:
As far as test them out. I use badblocks (available on most linux livecds / sysrescuecd) and a 4 pass read / write test then check the smart data for any reallocated sectors or any other problems (pending sectors non zero ...) . A full format then checking the smart data would be acceptable.
 
Back
Top