• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Weird Q6600 Core Temp

R

Raven88

Weaksauce
Joined
Aug 26, 2004
Messages
108
I am running Prime95 and getting core temps of 57, 57, 51, 49. I know not all core temps are going to be the same, but should I be that far off with the 49?
 
just to kinda give you a comparision I'm running a q6600 @ 3.2 temps are 48-40-42-45
 
ok so the random temp that is just way out there is nothing to worrie about then.
 
I really wouldn't worry that much I've been running this system since august and everythings going great...Just enjoy :)
 
My OC now is FSB=307, CPU=2763 MHz. I am using Q-Fan to control the CPU fan speed.

According to SpeedFan, CPU idle, CPU=31, Core=40,40,38,38 and the fan is running at 970 RPM.

After running Prime95 for an hour for all 4 cores:
According to SpeedFan, CPU 100%, CPU=47-50, Core1 and Core2 = 58-63, Core3 and Core4 = 54-59. Fan=2250 RPM.
 
Ok just wanted to make sure nothing was up with the 1 temp being a bit lower then the others.
 
no temps aren't at full load thesy raise a good 2-4 degrees normally under full load
 
fantome2024 said:
no temps aren't at full load thesy raise a good 2-4 degrees normally under full load
Click to expand...

Even adding 4c to each reading, you still get 52-44-46-49. Very good temp.

My temp are much higher than yours (see my earlier thread).
 
You must log in or register to reply here.
Back
Top