weird issue after standby...

[Xenozx]

OK, I have 2 main PC's. I have my gaming rig, and my Server. MY server is a Opty 165 machine @ 2.7 ghz. When I turn it on, it boots up and is perfectly fine. It idles at 28c. Under load it hits about 50ish. My problem is when this computer goes into sleep mode and then I wake it up, it idles at 50c. Also, it acts really funky, like freezes here and there and stuff. The only way to get it back to normal is to reboot it. then it will start idling at 28c again, atleast until it goes to sleep again and wakes up.

Also, I remote into my gaming rig alot from work. I went into my motherboards bios on my server and turned on "WOL" How does WOL work? I mapped all the drives from my server to my gaming box and when I try to open one of the drives, it doesnt seem to wake up. I cant figure it out. So there are really 2 problems.

I ahve my bios on the server set to S3 as the standby type. Its XP now, and my main rig is vista. I will be changing that server to vista though soon.

 

[Xenozx]

bump for daytime

 

[Xenozx]

bump again

 

[Xenozx]

Well after all this I figured it out. I decided to install vista to see if that would fix the issue, and in the process I had to get sata drivers off of DFI's site. I also decided to check their bios section and found.

Revision A
Date Code 2006/04/06
File NF4ED406.EXE
Size 851,742 bytes
Description DiamondFlash Image for BIOS.

Please Click Here if you are not familiar with the procedure of Diamond Flash Image!!


The BIOS Upgrade for LP UT NF4 SLI-DR Expert Only
Major Reasons of Change:
1. Add CPU temperature calibration option.
2 . Fix S1/S3 temp error after resume.
3 . Fix startup VID option fail.
4 . Fix C 'n' Q .5 multiplier not working with opteron CPU.
5 . Fix day of month alarm can not set as 0 for every day usage.
6 . Fix ATI X1000 series logo error.
7 . Remove Write CAS latency item and replace it by Odd Divisor Select.
8 . Add support for SST 49LF040B LPC flash ROM