Weird HDD issue, need help with gigabyte raid...

TheDarkTao

Gawd
Joined
Feb 5, 2005
Messages
800
Hey [H]ard gurus....


If any of you recall I had a nightmare with raid before, but fixed it after about 2 months work. So I have been nervious about raid...


Well, here is the new situation. I built a new computer, new everything. I just got a great error.... Windows (vista 64) says that my harddrive is reporting errors, and I should back up all data and not use the system.

I am making a backup as I type. But the quick question.... I have several of the same 500gb WD drives... I do not think the drive is dying, but it may well be, so I wanted to set up a raid one array. I am running a p35-ds3r and I wanted to set up raid 1. Is there a way to do that on a drive that already has OS/software installed? I know how to do it on a Nvidia system... what about an intel p35?


Thanks for the help guys, as always, mucho appreciated!

PS: Has a ICH9R raid controler
 
I'm not a RAID expert (or even novice really) but would have to say that if you have a non-RAID drive with data on it already and use it as part of a RAID 1 array, that you stand a fair chance of reading it.

Because it is mirroring, there might be a way of telling the system that the drive with the data on it is the good one and the other one is the new one and for it to mirror the data over. I suppose this all depends on how smart the RAID system is to begin with and if it has this feature.
 
Yea, I am hoping to figure this out... maybe if I can clone the drives and then do raid 1 or something...
 
I'm not aware of a way to convert a drive to RAID1 without starting from scratch. I recently had a problem with a BIOS upgrade and lost my RAID1 config. I could not restore the two drives to RAID1 without losing the contents of the drives.

I think the only solution would be to do a full backup of the drive, set up the RAID1 config and then restore to the mirrored drives. This backup would have to be one that is restore-and-go - i.e. the OS and all software equivalent to reinstalled. A simple file-copy won't do.
 
How do you restore from a backup? I already made one, and I do happen to have 3 500gb drives....
 
Assuming your backup was made with some software - follow that software's instructions for a restore.

If all you did was a massive file copy, then you will only be able to copy the files back and not restore the system.

A proper full backup will provide a proper restore as if it installed all the software - that means it backed up the registry (I'm assuming Windows here - I don't know enough about *nix to comment) and will restore the registry before it restores the files. You might need a commercial product to do this, though there are probably free/open source/shareware variants of this too.
 
Back
Top