Weird boot problem

jnick

2[H]4U
Joined
Sep 25, 2004
Messages
2,888
I had given my S939 machine to my uncle once I upgraded to C2D. It's specs are:

DFI NF4 Ultra-D
2x1GB Gskill DDR500 HZ
AMD Opty 170
Nvidia 7950GX2

It was working fine for a while, however now it's acting a bit strangely. On cold boots only the computer will take forever to finish POSTing and finish displaying the IRQs, etc. Basically, the first two screens (POST and IRQ) stay up for a good 5 minutes before windows even beings to load.

However, if I restart the computer, this does not happen.

So far, I've tried:

Setting the BIOS to defaults
Setting the OC back to stock
Swapping IDE cables
Booting without the optical drives
Clearning the CMOS
Ran SMART diagnostics on the HDD - both are fine
Standard Adware and spyware checks - he was clean

Also, when I enter the BIOS on a cold boot it's extremly slow. It is almost like images loading on a 56k internet connection. When maneuvering in the bios with the keyboard, it lags hardcore.

Any ideas?
 
Try using only one memory module at a time.

You might want to try booting with only the bare components needed for a boot.
If this works, either something previously plugged in has a problem or the PSU cant handle everything plugged in.
 
Back
Top