Weird Asus a8n IDE Problem

GMaxx

Limp Gawd
Joined
Jan 13, 2005
Messages
311
I keep on getting a "IDE Channel 1 no 80 conductor cable installed" which keeps me from posting and I have to press f1 to continue onwards.

I've got the HDD 80 pin (blue colored) cable that came with this mobo in the primary ide and the cd-rom cable in the secondary ide. I've played around with these cables and unplugged them al and plugged them back in again. No matter what I do I still get this eror. Is this a bad IDE port on the mobo or am I just overlooking something.

Also, does cpuz require you to post to recognize your oc. I'm showing my oc to 2.5ghz in the bios, but cpuz refuses to recognize it and just shows 2.0ghz.

Any comments would be appreciated. Thanks!
 
babyjocko said:
Your DVD probably wants UltraDMA mode 4, which requires an 80-conductor cable

Hi, wouldn't the cd-rom cable be 80-conductor. I've had no trouble using my dvd-rom to read/burn things. Thanks!
 
The mobo comes with 3 ribbon cables, one labeled hard drive which is an 80 conductor, one labeled cd rom drive which is a 40 conductor, and one labeled floppy drive.
 
AuroraProject said:
The mobo comes with 3 ribbon cables, one labeled hard drive which is an 80 conductor, one labeled cd rom drive which is a 40 conductor, and one labeled floppy drive.

Yup, I've got the hdd cable connected to my hd and the cd-rom cable connected to my dvd-rom. Blue to blue and black to black. I've got my hdd as primary and dvd-rom as secondary with the settings in the bios of the hdd drive loading first before the dvd-rom.

I'm assuming IDE channel 1 is the primary channel. Would the cd-rom cable in the seocndary IDE be causing this problem because it is only 40 conductor. I'm trying to find out of the IDE ports on my mobo are bad.

Thanks!
 
how to fix...
dl the latest 1004.001 beta bios and extract
clear the CMOS and remove batery for a minute or so
flash the new bios
set up your bios
your done...
 
Voorstryden said:
how to fix...
dl the latest 1004.001 beta bios and extract
clear the CMOS and remove batery for a minute or so
flash the new bios
set up your bios
your done...

Ok,

I'll give that a try. I was hasn't to flash my bios yet given all the problems with the other one, but let me try that.
 
GMaxx said:
Also, does cpuz require you to post to recognize your oc. I'm showing my oc to 2.5ghz in the bios, but cpuz refuses to recognize it and just shows 2.0ghz.

Any comments would be appreciated. Thanks!

Only quoting this part since this is what I'm focusing on.

Is your CPU's native clockspeed 2.0ghz? And are you on BIOS 1002 (or was on 1002 when you last used CPU-Z and got this result?).

Reason I ask is that with BIOS 1002, it won't let me go past a FSB of 210 without posting a false CPU overclock error. If I hit F1, it shows in the BIOS I'm at whatever I set it to last, but unless I resave the BIOS settings, it will boot in a form of "safe mode" for lack of a better term, and POST at a stock FSB of 200. If I just ignore it and hit a key to continue POSTing despite the error, same thing it will just POST at 200 even if the BIOS setting is above 210. Changing to "Halt on No Errors' in BIOS 1002 causes it to POST at 200 FSB also, only way with BIOS 1002 to truly go above 210 is by resaving the setting each and every time one boots up initially, at least it is on my end.

I'm wondering since you're hitting an error with your IDE cable, if you're also hitting the error I got under BIOS 1002, but it's not reporting it since it already has the IDE cable error to report.

This of course assumes you're OCing past a 210 FSB and using BIOS 1002. If not, then nevermind. ;)
 
Arvig said:
Only quoting this part since this is what I'm focusing on.

Is your CPU's native clockspeed 2.0ghz? And are you on BIOS 1002 (or was on 1002 when you last used CPU-Z and got this result?).

Reason I ask is that with BIOS 1002, it won't let me go past a FSB of 210 without posting a false CPU overclock error. If I hit F1, it shows in the BIOS I'm at whatever I set it to last, but unless I resave the BIOS settings, it will boot in a form of "safe mode" for lack of a better term, and POST at a stock FSB of 200. If I just ignore it and hit a key to continue POSTing despite the error, same thing it will just POST at 200 even if the BIOS setting is above 210. Changing to "Halt on No Errors' in BIOS 1002 causes it to POST at 200 FSB also, only way with BIOS 1002 to truly go above 210 is by resaving the setting each and every time one boots up initially, at least it is on my end.

I'm wondering since you're hitting an error with your IDE cable, if you're also hitting the error I got under BIOS 1002, but it's not reporting it since it already has the IDE cable error to report.

This of course assumes you're OCing past a 210 FSB and using BIOS 1002. If not, then nevermind. ;)

Hi, hope things are going better with you. Get your Raptors yet?

You may have hit the nail on the head. My native speed is 2.0gHz and I'm on bios 1002. I can't post because of this no 80 conductor cable error. I go into the bios and while I'm there I make sure to save my bios changes on the oc and memory timings. I go back and get that stupid error again, but I press f1 to continue. Funny thing is that my memory timing changes will show up on cpuz, but not my oc changes. :confused:

I'm starting to wonder if this no 80 conductor cable error is bios induced, but I haven't seen anyone else complain about it. I'm weary to flash the bios with 1004.001 given that it seems people are still having problems with it. However, I got no ncq drives, so maybe I'll give the new bios a shot before ripping the dam- board out and throwing it against the wall. Feel like doing that, but in reality might be a rma for me if I can't get this weird error fixed.

Thanks.
 
GMaxx said:
Hi, hope things are going better with you. Get your Raptors yet?

You may have hit the nail on the head. My native speed is 2.0gHz and I'm on bios 1002. I can't post because of this no 80 conductor cable error. I go into the bios and while I'm there I make sure to save my bios changes on the oc and memory timings. I go back and get that stupid error again, but I press f1 to continue. Funny thing is that my memory timing changes will show up on cpuz, but not my oc changes. :confused:

I'm starting to wonder if this no 80 conductor cable error is bios induced, but I haven't seen anyone else complain about it. I'm weary to flash the bios with 1004.001 given that it seems people are still having problems with it. However, I got no ncq drives, so maybe I'll give the new bios a shot before ripping the dam- board out and throwing it against the wall. Feel like doing that, but in reality might be a rma for me if I can't get this weird error fixed.

Thanks.

Yeah, I cloned over to the Raptors, found a pretty decent little program to do it also, and pulled the NCQ drives. So far I'm on 1004.001, and no problems with it...probably.

Here's the software. MODERATORS...if this is seen as spamming for some reason, please just edit out the link to the software but don't delete the rest of the post:

http://www.acronis.com/homecomputing/download/trueimage/

That's the download to the 15 day trial version, which is fully functional. Other then giving them an e-mail addy, the trail version is free.

If I do have a problem with 1004.001, it's the chipset fan. I'm getting a possibly false reading of it claiming that it's either not spinning, or going too slow. When I look in the BIOS, it's reading at 4000 RPM initially, but speeding up to it's full speed of 7000 to 8000 RPM or so. If I reboot or even do a shut down, then come back up no error is reported, and the fan is spinning at full speed initially. It's only if I let the PC sit for more then an hour or two.

1004.001 has a setting in the hardware monitor to tell it to ignore the CPU fan speed RPM's for the purposes of an error, so I'm hoping it's just that...it's now reporting the chipset fan speed as an error if it's not up to full speed right when it posts. If not, then my chipset fan is burning out, and I need to find an aftermarket fan that will fit that small of a space, especially with two video cards installed.

But ignoring that minor bit, all is well on my end since I stopped using the NCQ drives on 1004.001.

As an aside, 1003.007 is still on ASUS' site as a beta BIOS download, or was this morning, if you want to try it and are leery of 1003 Final.

EDIT: As an aside, have you just tried booting with no optical drives attached, and your hard drive attached to the 80 pin cable? Or pulling what you know to be a 80 pin from another PC, and attaching your optical drives to that? Hopefully these questions don't seem too obvious, but worth a shot.

I'm using an aftermarket 80 pin IDE round cable on my optical drives, so I don't know if the ASUS ribbon cables have some odd quirk to them...if a flat ribbon cable can have an odd quirk. ;)
 
Voorstryden said:
1003.007 is giving people corrupt eeproms...
do not use...
use 1003 final or the new 1004

Eh, as if the date/time stamp of this post, looks like they now yanked 1003.007 anyway, at least from the normal ASUS download URL.

By "new 1004", do you mean 1004.001 found on the ASUS German FTP site? This one:

ftp://ftp.asuscom.de/pub/ASUSCOM/BIOS/Socket_939/NVIDIA_Chipset/nForce4_SLI/A8N-SLI_Deluxe/

If so, then that's the one I've been using since I swapped out my NCQ drives.
 
Arvig said:
Eh, as if the date/time stamp of this post, looks like they now yanked 1003.007 anyway, at least from the normal ASUS download URL.

By "new 1004", do you mean 1004.001 found on the ASUS German FTP site? This one:

ftp://ftp.asuscom.de/pub/ASUSCOM/BIOS/Socket_939/NVIDIA_Chipset/nForce4_SLI/A8N-SLI_Deluxe/

If so, then that's the one I've been using since I swapped out my NCQ drives.

How's the 1004.001 bios? Haven't heard anything bad about it yet? Holding my breath to see if I should flash to it. :rolleyes:
Gonna tyr to fix these problems this weekend. On the lighter side of things, at least 6800gt pcie prices are starting to drop.

Thanks
 
In all this I still haven't heard that your 40 conductor cd rom cable was swapped for a 80. If I missed it sorry :) Just drop a spare 80 conductor in there and that problem should go away.
 
Should you be using an 80-pin even when optical drives only use the bandwidth available through a 40-pin? Or is it better to use an 80-pin?
 
ohnnyj said:
Should you be using an 80-pin even when optical drives only use the bandwidth available through a 40-pin? Or is it better to use an 80-pin?

*shrugs* I think all the aftermarket round IDE cables are 80 pin, and it's what I have hooked up to my optical drives. So don't think it will kill things for him to try a 80 pin on them. ;)
 
GMaxx said:
How's the 1004.001 bios? Haven't heard anything bad about it yet? Holding my breath to see if I should flash to it. :rolleyes:
Gonna tyr to fix these problems this weekend. On the lighter side of things, at least 6800gt pcie prices are starting to drop.

Thanks

It seems okay, hasn't done anything horrid to me yet, so anyone without NCQ drives I think can use it. I have a new minor problem in that it looks like my northbridge fan might be going out now, when I first POST it complains about the chipset fan RPM's not being high enough. Large EDIT: Forgot I had posted a lot about the chipset fan problem above, so mostly editing out what I just typed so I won't repeat myself. Err...if you want to see what I got on a lark to see if it fits, and if it does to replace the old fan, here you go

http://www.newegg.com/app/ViewProductDesc.asp?description=35-116-010&depa=0

They say it's noisy, but I already have some noisy case fans in it...hell, I used to have Vantec Tornados in another case, noise won't bother me. ;)
 
Praxi said:
In all this I still haven't heard that your 40 conductor cd rom cable was swapped for a 80. If I missed it sorry :) Just drop a spare 80 conductor in there and that problem should go away.

Thanks for the suggestions. I've tried that too. I called for a rma since I'm w/i my 10 day return policy. I was tempted to go to the Neo2 or the Epox 9nda3j instead of this guy, but I tend to change my vid cards every year or so and was worried about there not being any good agp cards after the 6800 ultra and x800/850 xt. So, I guess I'll continue to be a beta tester for them too. :rolleyes:

Also, I was thinking about the dfi or msi sli mobos, but you'd be Mr. Beta tester too for them and at least this mobo has been out for a while. Oh well....
 
GMaxx said:
Thanks for the suggestions. I've tried that too. I called for a rma since I'm w/i my 10 day return policy. I was tempted to go to the Neo2 or the Epox 9nda3j instead of this guy, but I tend to change my vid cards every year or so and was worried about there not being any good agp cards after the 6800 ultra and x800/850 xt. So, I guess I'll continue to be a beta tester for them too. :rolleyes:

Also, I was thinking about the dfi or msi sli mobos, but you'd be Mr. Beta tester too for them and at least this mobo has been out for a while. Oh well....


Well, the MSI NForce 4 Ultra has been out for a bit less then a week, and I haven't seen too many complaints regarding it so far, so maybe the MSI SLI will be okay, it is close to the same board, almost same chipset anyway.

The Gigabyte SLI is out now...haven't seen too many complaints other then the memory sits too close together...but haven't seen a lot of praise. Haven't seen much on the forums about the Gigabyte SLI one way or the other really.
 
Most people probably bought the ASUS board and see no compelling reason to switch to the Gigabyte. I don't at least.
 
ohnnyj said:
Most people probably bought the ASUS board and see no compelling reason to switch to the Gigabyte. I don't at least.


Yeah, but you'd think SOMEONE has bought the Gigabyte by now...they do have their fans. Or maybe someone who had NCQ drives or GMaxx's IDE drive problem might have ditched their ASUS already for the Gigabyte. I just still find it weird I've seen almost no posts, no matter where I go...almost does make me think it's not selling well for some reason...I've seen posts about the Chaintech and MSI Force NForce 4 Ultra boards, and although not a lot on this forum, seen on others some on the DFI and it's not even out yet.
 
Back
Top