We have a GF4 TI4400 problem! BIOS need!

hywdx80

Gawd
Joined
Jun 28, 2006
Messages
552
Well lets say I did something on accident. I went to hook up my floppy drive to my old back up p3 600mhz computer w/ an AGP Gainward Geforce Ti4400 Video card. I did this because I wanted to download a couple of bios for my upcoming DFI p965 motherboard that I'm getting tomorrow.

Well I hooked up the A:\ into the computer and forgot to realize there was a 7900GT Superclock BIOS flash floppy to flash my non-superclock version. Of course I didnt realize the floppy was still in the A:\ Drive. Computer booted up, I didn't realize it was in the drive until too late. I just computer off a little too late and now the card doesn't work anymore :(.

I've been searching google a while now and cant seem to find anything, (most of it is in other languages, I guess Ti4400 cards are now the top of the line in Africa.

Is this the death my Ti4400 :confused:
 
well i think im screwed. Even when I put the card in the computer doesnt post, just sits there. So I believe even if I did have the ti4400.rom it still wouldnt work because I have no way to access the card. :rolleyes:
 
This is when you use a PCI videocard to get back to a command prompt, then flash the GF4 from there. I'm sure you can find a GF4 bios with some google'in.
 
You can boot up with PCI video card (shit $2 1MB Trident yo) and flash AGP card
 
www.mvktech.net should have the BIOS for your card.

Set the BIOS floppy up on a good machine, then stick it in the machine with the fubar'ed card, cross your fingers. As long as you have the autoexec.bat setup to blind flash the card, it should work reguardless of wether you get a signal on the monitor or not. I havent met a bad flash I couldn't fix yet.
 
Back
Top