WD 500GB SATA HDD Issues

Joined
Feb 6, 2006
Messages
813
I just got my new western digital 500gb sata drive from new egg so i took my old hdd's out and put in the new sata and was attempting to install windows but it wont reconize the hdd. I know my sata works because i have a sata dvd burner hooked up and it reconizes that. So what am i doing wrong here. Do i need to set jumpers on the sata drive just like a normal ide drive cause i see the place for jumpers but theres no plastic jumper in it. And also this pc im installing it in is an older MSI neo-2 s939 agp mobo and the sata drive is a new model http://http://www.newegg.com/Product/Product.aspx?Item=N82E16822136320 it should work with my computer right ? I mean i know it wont run a 3.0gb/s but it should still work from what i was told. Its been a long time since i messed around with an older system like this and i dont remember if i had to set jumpers on satas or not lol been too long since my last build. So help me out please lol
 
no jumpers on SATA drives, except to force the disk into SATA1 mode, either way it shouldnt cause problems you are having. its most likely a bios setting. there should be an option to run the SATA connections in either IDE, RAID, or ACHI modes. you want ACHI if you can, IDE if you cant use ACHI for some reason.

on the POST screen, does it list the drive?
 
No the drive doesnt post. Its like its not even plugged in. But i can hear it turning on soni kjow its not dead or anything. Imma try to swith that opition is the bios. I dont ever remember seeing that option but it has to be there right ?
 
Your BIOS should also have a display of the attached drives in the setup. If the drive is not listed and you are sure your SATA ports are working the drive is likely DOA. Yes these things happen. At work we used to have 1 DOA drive each newegg shipment but that was back in 2008 when they were very careless with their packaging.
 
Back
Top